Denitrification rates in organic and mineral soils from riparian sites:: a comparison of N2 flux and acetylene inhibition methods

Denitrification rates were measured in relatively dry mineral soils and water-saturated organic soils by both direct N-2 flux and acetylene inhibition methods to compare the relative sensitivity of the two methods and their applicability to different soil types and saturation conditions. The direct N-2 flux method, previously used only in submerged sediments, was modified for use in terrestrial soils. Our experiments demonstrated that the N-2 flux method is adaptable for both mineral and water-logged organic soils, and that denitrification rates based on direct N-2 fluxes can be measured after only 2 days of incubation in most cases. We used a diffusive flux model to separate the portion of total N-2 flux attributable to denitrification from that due to passive diffusion of atmospheric N-2 from soil porespaces. Denitrification rate measurements were taken during spring, summer, and fall seasons using replicate cores from four different riparian sites (two with mineral soil, two with organic soil). Rates determined by N-2 flux were 35-130 and 10-245 mu mol N m(-2) h(-1) for mineral and organic soils, respectively. Those by acetylene inhibition, for the same sites were one, and sometimes two, orders of magnitude less with rates of 0.1-10 mu mol N m(-2) h(-1) for mineral soil and 0.2-3 mu mol N m(-2) h(-1) for organic soil. This study has demonstrated that denitrification measured by acetylene inhibition in riparian sites may be underestimated by at least an order of magnitude in both mineral and organic soils. (C) 2000 Elsevier Science Ltd. All rights reserved.