Effect of impact angle on the slurry erosion-corrosion of 304L stainless steel

This communication describes an investigation of the effect of impact angle on slurry erosion-corrosion of stainless steel using a new slurry erosion rig. With the new apparatus, it is possible to measure the individual erosion events under impact as both electrochemical current/time transients, and mechanical transients through acoustic emission (AE) simultaneously. Each sharp rise observed in the electrochemical current transient under particle impact is accompanied by an AE event. These sharp current rises are attributed to the rupture or removal of the oxide film on the surface by the abrasive particles. The correlation between the current rise and the maximum of the AE event, although scattered, shows an increase with decreasing impact angle. The current transients due to individual erosion events show that on the average, the current rise is greater and the rise time is longer at oblique angles compared with those at normal incidence. The degree of denudation of the metal surface by individual particle impingements, the process which strips the surface of its passivity, increases at more oblique angles. Weight loss measurements demonstrate that the synergistic effect between erosion and corrosion is enhanced by a more oblique angle of impact. The origin of the synergism is discussed. (C) 2000 Published by Elsevier Science S.A. All rights reserved.