New method of treating dilute mineral acids using magnesium-aluminum oxide

被引：70

作者：

Kameda, T

Yabuuchi, F

Yoshioka, T

Uchida, M

Okuwaki, A

机构：

[1] Tohoku Univ, Inst Multidisciplinary Res Adv Mat, Aoba Ku, Sendai, Miyagi 9808577, Japan

[2] Tohoku Univ, Grad Sch Engn, Dept Appl Chem, Aoba Ku, Sendai, Miyagi 9808579, Japan

来源：

WATER RESEARCH | 2003年 / 37卷 / 07期

关键词：

hydrotalcite; Mg-Al oxide; dilute mineral acid; treatment; intercalation;

D O I：

10.1016/S0043-1354(02)00374-3

中图分类号：

X [环境科学、安全科学];

学科分类号：

08 ; 0830 ;

摘要：

Mineral acids, such as H3PO4, H2SO4, HCl, and HNO3, were treated with magnesium-aluminum oxide (Mg-Al oxide), which behaved as a neutralizer and fixative of anions. Anion removal increased with increasing Mg-Al oxide quantity, time, Mg/Al molar ratio, and initial acid concentration. Up to 95% removal of anions was achieved in 0.5 N acids using a stoichiometric quantity of Mg0.80Al0.20O1.10 for H3PO4, 1.75 stoichiometric quantities for H2SO4, or 2.5 stoichiometric quantities for HCl or HNO3 at 20degreesC over a period of 6 h. The final solutions were found to have a pH in the range of 8-12. Selectivity of acid removal was found to follow the following order: H3PO4 > H2SO4 > HCl > HNO3. The equivalent of acid removal per 1 g of Mg-Al oxide decreased as the Mg/Al molar ratio of Mg-Al oxide increased. (C) 2002 Elsevier Science Ltd. All rights reserved.

引用

页码：1545 / 1550

页数：6

共 25 条

[1] HYDROTALCITE-TYPE ANIONIC CLAYS: PREPARATION, PROPERTIES AND APPLICATIONS [J].