Buckling load analysis of grid stiffened composite cylinders

被引:168
作者
Kidane, S [1 ]
Li, GQ
Helms, J
Pang, SS
Woldesenbet, E
机构
[1] Louisiana State Univ, Dept Mech Engn, Baton Rouge, LA 70803 USA
[2] So Univ, Dept Mech Engn, Baton Rouge, LA 70813 USA
基金
美国国家航空航天局;
关键词
polymer-matrix composites; buckling; analytical modeling; grid stiffened cylinder;
D O I
10.1016/S1359-8368(02)00074-4
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Stiffened cylindrical shells are the major components of aerospace structures. In this study global buckling load for a generally cross and horizontal grid stiffened composite, cylinder was determined. This was accomplished by developing an analytical model for determination of the equivalent stiffness parameters of a grid stiffened composite cylindrical shell. This was performed by taking out a unit cell and smearing the forces and moments due to the stiffeners onto the shell. Based on this analysis the extensional, coupling and bending matrices (A, B and D matrices, respectively) associated with the stiffeners were determined. This stiffness contribution of the stiffeners was superimposed with the stiffness contribution of the shell to obtain the equivalent stiffness parameters of the whole panel. Making use of the energy method the buckling load was solved for a particular stiffener configuration. Buckling test was also performed on a stiffened composite cylinder and compared with analytical results. Finally, using the analytical model developed, parametric analysis of some of the important design variables was performed and based on these results conclusions were drawn. (C) 2002 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:1 / 9
页数:9
相关论文
共 11 条
[1]  
Agarwal BhagwanD., 1990, ANAL PERFORMANCE FIB
[2]  
Baruch M, 1963, J MECH SCI, V6
[3]  
BRUHN E.F., 1973, Analysis and Design Of Flight Vehicle Structures"
[4]  
Brush D., 1975, Buckling of Bars, Plates and Shells, DOI DOI 10.1115/1.3423755
[5]  
Gerdon G, 1985, AIAA J, V23, P1753, DOI DOI 10.2514/3.9162
[6]  
Li G., 2001, ANAL GRID STIFFENED
[7]  
Navin J., 1995, 110162 NASA
[8]  
Phillips J.L., 1990, CCMS9050 NASA
[9]  
RAMM E, 1982, BUCKLING SHELLS
[10]  
TROISKY MS, 1976, STIFFENED PLATES BEN