Sequential non-linear least-square estimation for damage identification of structures with unknown inputs and unknown outputs

The detection of structural damages real-time on-line, based on vibration data measured from sensors, is an important but challenging research topic, and it has received considerable attentions recently. Due to practical limitations, it is highly desirable to install as few sensors as possible in the structural health monitoring system, leading to incomplete measurements of structural responses and excitations. The traditional time-domain analysis techniques, such as the least-square estimation (LSE) method and the extended Kalman filter (EKF) approach, require that all the external excitations (inputs) be available, which may not be the case for most structural health monitoring systems. Recently, the adaptive sequential non-linear least-square estimate (SNLSE) method has been proposed for the on-line identification of structural damages. In this paper, we extend the SNLSE method to cover the general case with unknown (unmeasured) excitations (inputs) and unknown (unmeasured) acceleration responses (outputs) in order to reduce the number of sensors required in the structural health monitoring system, referred to as the SNLSE-UI-UO. Analytic recursive solutions for the new approach are derived and presented. The accuracy and effectiveness of the proposed approach have been demonstrated using the Phase I ASCE structural health monitoring benchmark building, a 5-degree-of-freedom non-linear hysteretic building, model, and a 3-story steel frame finite-element model. Simulation results indicate that the proposed approach is capable of tracking the changes of structural parameters leading to the identification of damages. (c) 2007 Elsevier Ltd. All rights reserved.