Optimization of microwave-vacuum drying of button mushrooms using response-surface methodology

Button mushrooms (Agaricus bisporous) were dried in a microwave-vacuum dryer up to a final moisture content of around 6% (d.b.). The effect of microwave power level (115 to 285 W), system pressure (6.5 to 23.5kPa), and slice thickness (6 to 14mm) on drying efficiency and some quality attributes (color, texture, rehydration ratio, and sensory attributes) of dehydrated mushrooms were analyzed by means of response surface methodology. A rotatable central composite design was used to develop models for the responses. Analysis of variance showed that a second-order polynomial model predicted well the experimental data. The system pressure strongly affected color, hardness, rehydration ratio, and sensory attributes of dehydrated mushrooms. A lower pressure during drying resulted in better quality products. Optimum drying conditions of 202 W microwave power level, 6.5 kPa pressure, and 7.7mm slice thickness were established for microwave vacuum drying of button mushrooms. Separate validation experiment was conducted at the derived optimum conditions to verify the predictions and adequacy of the models.