TEM investigations of fine niobium precipitates in HSLA steel

Commercially produced 0.03 % C, 0.08 % Nb, 0.01 % Ti high strength low alloyed (HSLA) steel in the form of 20 mm thick plates was investigated. The steel was thermomechanically processed and the mechanical properties of the steel were evaluated by tensile testing. Using analytical and high resolution transmission electron microscopy the distribution, morphology, composition, crystal structure and particle size of niobium and titanium carbonitrides were observed and identified in these steels. The distribution of the precipitates was found to be nearly random, with occasional occurrence of precipitation free zones. Complex agglomerates with a cubic TiN seed crystal overgrown by a cubic NbC particle were the most commonly observed precipitates. Further TEM analysis in the accelerated cooled and tempered specimens in 1/4 plate thickness did not reveal any evidence that additional precipitation in the ferrite occurred. Precipitation in ferrite was only detected after subsequent cold deformation and tempering of the same samples. By a combination of EFTEM, STEM, HRTEM in addition to EDX spectroscopy, a large population of strain induced NbC precipitates with fcc crystal structure ranging in size down to 2 nm were identified in the ferrite matrix.