Leaching behavior of copper using electro-generated chlorine in hydrochloric acid solution

被引：64

作者：

Kim, Eun-young ^{[1
]}

Kim, Min-seuk ^{[1
]}

Lee, Jae-chun ^{[1
]}

Yoo, Kyoungkeun ^{[1
]}

Jeong, Jinki ^{[1
]}

机构：

[1] Korea Inst Geosci & Mineral Resources KIGAM, Mineral Resources Res Div, Taejon 305350, South Korea

来源：

HYDROMETALLURGY | 2010年 / 100卷 / 3-4期

关键词：

Copper; Cuprous; Cupric; Leaching; Electro-generated chlorine; DISSOLUTION KINETICS; WASTE; RECOVERY; METALS;

D O I：

10.1016/j.hydromet.2009.10.009

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The leaching behavior of metallic copper has been investigated using chlorine electro-generated at the anode in 1.0 mol/L HCl solution An electrochemical reactor divided into two compartments by an anion exchange membrane was employed for these experiments. Various parameters, viz., current density, chloride concentration, leaching temperature and time, and agitation speed, were studied to understand the mechanism of copper leaching. The leaching rate of copper increased with increasing current density, from 10 to 40 mA/cm(2), increasing agitation speed, from 200 to 600 rpm, and increasing temperature. from 25 to 50 degrees C. The addition of Cl- ions enhanced the leaching efficiency of copper remarkably by dissolving CuCl precipitated on the surface of the copper plate. Based on the results of the leaching experiment, the leaching of copper by electro-generated chlorine is proposed to proceed through three stages: stage I (ORP of leach solution approximate to 1300 mV(SHE)). stage II (380 mV(SHE) < ORP < 490 mV(SHE)). and stage III (ORP > 490 mV(SHE)). (C) 2009 Elsevier B V. All rights reserved.

引用

页码：95 / 102

页数：8

共 31 条

[11] Dissolution kinetics of copper, white metal and natural chalcocite in Cl2/Cl- media [J].