Influence of a fine talc on the properties of composites with high density polyethylene and polyethylene/polystyrene blends

Fine talc filled high density polyethylene (HDPE) and HDPE/polystyrene (PS) blends were extruded, injection moulded and characterized. Some of the mechanical properties of the talc filled HDPE and talc filled 75/25 HDPE/PS blend were deduced from stress-strain measurements. A comparison between the effect of the talc on the properties of the filled HDPE and filled 75/25 HDPE/PS blend showed that the mineral filler had the same effect on both systems provided that its array in the organic matrix is almost the same in both cases. In fact, the rheological results proved that the dispersion of talc in the HDPE matrix was not really affected by the presence of PS. The study particularly focused on the effect of talc on the ultimate tensile strength of the filled HDPE and that of the filled blend. It has been noted that the brittle nature of PS neutralizes, to a certain extent, the degrading effect of talc on this property. Furthermore, both PS and talc have a complementary effect on the stiffness and the resilience of HDPE/PS/talc blend composites.