Failure analysis of pin-loaded aluminum-glass-epoxy sandwich composite plates

被引：53

作者：

Içten, BM ^{[1
]}

Sayman, O ^{[1
]}

机构：

[1] Dokuz Eylul Univ, Dept Mech Engn, Izmir, Turkey

来源：

COMPOSITES SCIENCE AND TECHNOLOGY | 2003年 / 63卷 / 05期

关键词：

failure mode; mechanical properties; sandwich;

D O I：

10.1016/S0266-3538(02)00260-9

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

The aim of this study is to investigate failure load and failure mode in an aluminum-glass-epoxy sandwich composite plate, with a circular hole, which is subjected to a traction force by a pin. To evaluate the effects of joint geometry and fiber orientation on the failure strength and failure mode, parametric studies were performed experimentally. The end distance to diameter (E/D), and width to diameter (W/D) ratios in the plate were changed from 1 to 5 and 2 to 5, respectively. Experimental results show that the first failure load and ultimate failure load increase by increasing E/D and W/D ratios, and when these ratios are equal or greater than 4, full bearing strength occurs. (C) 2002 Elsevier Science Ltd. All rights reserved.

引用

页码：727 / 737

页数：11

共 18 条

[1] Failure analysis of two-dimensional carbon-epoxy composite plate pinned joint [J].

Aktas, A ;

Karakuzu, R .

MECHANICS OF COMPOSITE MATERIALS AND STRUCTURES, 1999, 6 (04) :347-361

[2] A progressive damage model for mechanically fastened joints in composite laminates [J].

Camanho, PP ;

Matthews, FL .

JOURNAL OF COMPOSITE MATERIALS, 1999, 33 (24) :2248-2280

[3] STRENGTH OF MECHANICALLY FASTENED COMPOSITE JOINTS [J].

CHANG, FK ;

SCOTT, RA ;

SPRINGER, GS .

JOURNAL OF COMPOSITE MATERIALS, 1982, 16 (NOV) :470-494

[4] THE EFFECT OF PIN LOAD DISTRIBUTION ON THE STRENGTH OF PIN LOADED HOLES IN LAMINATED COMPOSITES [J].

CHANG, FK .

JOURNAL OF COMPOSITE MATERIALS, 1986, 20 (04) :401-408

[5] FAILURE STRENGTH OF NONLINEARLY ELASTIC COMPOSITE LAMINATES CONTAINING A PIN LOADED HOLE [J].

CHANG, FK ;

SCOTT, RA ;

SPRINGER, GS .

JOURNAL OF COMPOSITE MATERIALS, 1984, 18 (05) :464-477

[6] FAILURE OF COMPOSITE LAMINATES CONTAINING PIN LOADED HOLES - METHOD OF SOLUTION [J].

CHANG, FK ;

SCOTT, RA ;

SPRINGER, GS .

JOURNAL OF COMPOSITE MATERIALS, 1984, 18 (03) :255-278

[7] Stress and failure analysis of mechanically fastened joints in composite laminates [J].

Dano, ML ;

Gendron, G ;

Picard, A .

COMPOSITE STRUCTURES, 2000, 50 (03) :287-296

[8]

GIBSON RF, 1994, PRINCIPALS COMPOSITE

[9] Strength prediction of mechanically fastened quasi-isotropic carbon/epoxy joints [J].

Hamada, H ;

Maekawa, ZI ;

Haruna, K .

JOURNAL OF COMPOSITE MATERIALS, 1996, 30 (14) :1596-1612

[10] Progressive failure analysis of pin-loaded carbon-epoxy woven composite plates [J].

Içten, BM ;

Karakuzu, R .

COMPOSITES SCIENCE AND TECHNOLOGY, 2002, 62 (09) :1259-1271

← 1 2 →