Effects of Fe(II) and hydrogen peroxide interaction upon dissolving U02 under geologic repository conditions

Iron redox cycling is supposed to be one of the major mechanisms that control the geochemical boundary conditions in the near field of a geologic repository for UO2 spent nuclear fuel. This work investigates the impact of reactions between hydrogen peroxide (H2O2) and iron (Fe2+/Fe3+) on UO2 dissolution. The reaction partners were contacted with UO2 in oxygen-free batch reactor tests. The interaction in absence of UO2 gives a stoichiometric redox reaction of Fe2+ and H2O2 when the reactants are present in equal concentration. Predomination of H2O2 results in its delayed catalytic decomposition. With UO2 present, its dissolution is controlled by either a slow mechanism (as typical for anoxic environments) or uranium peroxide precipitation, depending strongly on the reactant ratio. Uranium peroxide (UO4.nH(2)O, m-studtite), detected on UO2 surfaces after exposure to H2O2, was not found on the surfaces exposed to solutions with stoichometric Fe(II)/ H2O2 ratios. This suggests that H2O2 was deactivated in redox reactions before a formation of UO4 took place. ESR measurements employing the spin trapping technique revealed only the DMPO-OH adduct within the first minutes after the reaction start (high initial concentrations of the OH. radical); however, in the case of Fe(II) and H2O2 reacting at 10(-4) mol/L with UO2, dissolved oxygen and Fe2+ concentrations indicate the participation of further Fe intermediates and, therefore, Fenton redox activities.