Effects of reverse voltage and subzero startup on the membrane electrode assembly of a PEMFC

Effects of reverse voltage and frozen fuel cell startup on the membrane electrode assembly (MEA) were investigated for a proton exchange membrane fuel cell (PEMFC). A single cell was started from a subzero temperature by applying reverse voltage. The voltages applied to the cell were 0.8 and 1.2 V. The fuel cell performance was measured with a polarization curve and by cyclic voltammetry (CV), electrochemical impedance spectra (EIS), linear scan voltammetry (LSV) after each experiment. From the results, it was concluded that the catalyst activity, electrochemical active surface area (ECA) and the membrane were not damaged by the reverse voltage if the voltage was below 0.85 V. In contrast, a reverse voltage improved cell performance slightly. If the reverse voltage was larger than 0.85 V, the cell performance degraded. Another single cell with an active area of 128 cm(2) was started up at -15 degrees C by applying reverse voltage. The cell performance and MEA physical characteristic were tested before and after the freeze startup. From the results, the cell performance decayed MEA delamination was observed and the pore size distribution of the MEA changed. (c) 2007 Elsevier B.V. All rights reserved.