The adhesion of natural rubber to steel and the use of the peel test to study its nature

被引:31
作者
Cook, JW [1 ]
Edge, S [1 ]
Packham, DE [1 ]
机构
[1] Univ Bath, Sch Mat Sci, Bath BA2 7AY, Avon, England
关键词
rubber to metal bonding; adhesion; locus of failure; stick-slip; peel energy;
D O I
10.1016/S0143-7496(97)00024-9
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The peel test has been used to study the adhesion achieved between a simple natural rubber compound and mild steel by injection moulding in the presence of a commercial bonding system. Peel energies were calculated from the peel force results by allowing for the elastic energy stored in the detached rubber strip. The peel energy was found to be insensitive to the changes of peel rate evaluated in this work. Peel energy increased by a factor of about five as the peel angle increased from 30 degrees to 90 degrees. The locus of failure was cohesive within the rubber, but moved more deeply within the rubber and produced a severely torn fracture surface. (C) 1998 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:333 / 337
页数:5
相关论文
共 19 条
[1]  
ANDREWS EH, 1973, PROC R SOC LON SER-A, V332, P385, DOI 10.1098/rspa.1973.0032
[2]   On the mechanics of rubber-to-metal bond failure [J].
Ansarifar, MA ;
Lake, GJ .
JOURNAL OF ADHESION, 1995, 53 (3-4) :183-199
[3]   DEGRADATION OF RUBBER-TO-METAL BONDS DURING SIMULATED CATHODIC DELAMINATION [J].
BOERIO, FJ ;
HONG, SG .
JOURNAL OF ADHESION, 1989, 30 (1-4) :119-134
[4]  
COLEMAN EW, 1966, Patent No. 3258388
[5]  
COLEMAN EW, 1966, Patent No. 3258389
[6]  
COLEMAN EW, 1959, Patent No. 2900292
[7]   ADHESION OF VISCOELASTIC MATERIALS TO RIGID SUBSTRATES [J].
GENT, AN ;
PETRICH, RP .
PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL AND PHYSICAL SCIENCES, 1969, 310 (1502) :433-&
[8]  
GENT AN, 1977, J APPL POLYM SCI, V21, P69
[9]  
HATZINIKOLAOU TA, 1987, 3 INT C ADH YORK 7 9
[10]  
HIGGS RP, 1981, THESIS U ASTON BIRMI