Potential remediation of waters contaminated with Cr(III), Cu, and Zn by sorption on the organic polymeric fraction of olive mill wastewater (polymerin) and its derivatives

A study on the individual sorption of Cr(III), Cu, and Zn on polymerin, the humic-acid-like fraction of olive mill wastewater, and its derivatives, K-polymerin and an Fe(OH),polymerin complex, showed that these heavy metals were strongly sorbed on polymerin and K-polymerin in the order Cr(III) > Cu > Zn. The sorption on Fe(OH),polymerin was to a lower extent compared with that of the other two sorbents, but to a higher extent compared with ferrihydride [Fe(OH)(x)]. Combined atomic absorption spectrometry and diffuse reflectance infrared Fourier transform spectroscopy analyses showed that the selected heavy metals were individually sorbed on polymerin by means of a cation exchange mechanism, which was consistent with the replacement of Ca, Mg, K, and H bound to the carboxylate groups of the biosorbent and the concomitant chelation of the heavy metals by the OH groups of polymerin polysaccharide component. In binary combination and equimolar ratio, Cu was sorbed by polymerin more selectively than Zn. In ternary combination and equimolar ratio, Cr(III), Cu, and Zn were sorbed by polymerin in the order Cr(III) > Cu > Zn. The sorbing capacity of Zn and Cu was strongly influenced by Cr(III), whereas the sorbing capacity of Cr(III)was not affected by the presence of the other two metals. The overall sorbing capacity of the binary and ternary mixtures of the three metals on polymerin proved to be considerable and much greater than that on Fe(OH)(x)-polymerin. Simulated wastewaters contaminated with Cu and Zn were purified after three sorption cycles by polymerin renewed at each cycle,whereas those containing a mixture of Cr(III), Cu, and Zn showed residues of Zn after five cycles. We briefly discuss environmental and industrial advantages for a possible exploitation of polymerin.