Force and pressure distribution under vibratory tillage tool

Experiments were conducted to study the force requirement and pressure distribution under vibratory tillage tools in a soil bin with a sandy loam soil. The tool was oscillated sinusoidally in the direction of soil bin travel. An octagonal ring transducer and pressure sensors were used to measure the forces and soil pressure on the blade. The tool was operated at oscillating frequency of 4.5-15.6 Hz and amplitude of 11-26 mm. The soil bin travel speed was varied from 0.05 to 0.224 m/s. The test results obtained showed both the horizontal force and the vertical force decreased with increase in oscillating frequency. The normal pressure on the blade surface varied considerably. The peak normal pressure was found to increase with increase in oscillating frequency, oscillating amplitude and soil bin travel speed. The change in average normal pressure with change in oscillating frequency and amplitude was also investigated. (C) 2000 ISTVS. Published by Elsevier Science Ltd. All rights reserved.