Non-linear and failure behaviour of spotwelds: a "global" finite element and experiments in pure and mixed modes I/II

被引:39
作者
Bertrand, LA
Combescure, A
机构
[1] ONERA Lille, Dept Solid & Damage Mech, F-59045 Lille, France
[2] Inst Natl Sci Appl, LaMCos, F-69621 Villeurbanne, France
关键词
spotweld; experiment; equivalent model; crashworthiness; damage;
D O I
10.1016/j.ijsolstr.2004.06.009
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
The paper deals with joint element model used in crashworthiness simulations. The first part of the paper is dedicated to the formulation of a new "global" finite element for spotweld modelling. The mechanical behaviour of the joint is elastic-plastic type and damage is taken into account to model the failure of the welded area. The second part of the paper concerns a new experimental procedure for joint strength analysis in pure and mixed modes I/II and for joint model characterisation. Experiment is based on Arcan principle and results are compared to open literature. In the last part of the paper, the parameters of the new joint model are identified using experiments and used for several shapes of spot-welded specimens. The model predicts reasonably the elastic-plastic part of the response but is unable to predict the post-peak response observed especially in the case of pure shear. (C) 2004 Elsevier Ltd. All rights reserved.
引用
收藏
页码:6631 / 6646
页数:16
相关论文
共 28 条
  • [1] METHOD TO PRODUCE UNIFORM PLANE-STRESS STATES WITH APPLICATIONS TO FIBER-REINFORCED MATERIALS
    ARCAN, M
    HASHIN, Z
    VOLOSHIN, A
    [J]. EXPERIMENTAL MECHANICS, 1978, 18 (04) : 141 - 146
  • [2] A STABILIZATION PROCEDURE FOR THE QUADRILATERAL PLATE ELEMENT WITH ONE-POINT QUADRATURE
    BELYTSCHKO, T
    TSAY, CS
    [J]. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 1983, 19 (03) : 405 - 419
  • [3] CHAPULIOT S, 1993, REV EUROPEENNE ELEME, V2, P449
  • [4] A finite element to simulate the failure of weld points on impact
    Combescure, A
    Delcroix, F
    Caplain, L
    Espanol, S
    Eliot, P
    [J]. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2003, 28 (07) : 783 - 802
  • [5] The Iosipescu test method as a method to evaluate the tensile strength of brittle materials
    d'Almeida, JRM
    Monteiro, SN
    [J]. POLYMER TESTING, 1999, 18 (06) : 407 - 414
  • [6] Dvorkin EN., 1984, Eng Comput, V1, P77, DOI [10.1108/eb023562, DOI 10.1108/EB023562]
  • [7] HANSEEN AG, P MECAMAT C AUSS FRA
  • [8] ILLYUSHIN A, 1956, PLASTICITE
  • [9] IOSIPESCU N, 1967, J MATER, V2, P537
  • [10] Identification technique of constitutive model parameters for crashworthiness modelling
    Langrand, B
    Geoffroy, P
    Petitniot, JL
    Fabis, J
    Markiewicz, E
    Drazetic, P
    [J]. AEROSPACE SCIENCE AND TECHNOLOGY, 1999, 3 (04): : 215 - 227