The control volume finite element numerical solution technique applied to creep in softwoods

被引：13

作者：

Ferguson, WJ ^{[1
]}

机构：

[1] Univ Wales Coll Cardiff, Cardiff Sch Engn, Div Civil Engn, Cardiff CF2 1XH, S Glam, Wales

来源：

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES | 1998年 / 35卷 / 13期

关键词：

D O I：

10.1016/S0020-7683(97)00094-2

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

This paper presents the novel application of the control volume finite element method (CVFE), otherwise known as the vertex-centered control volume scheme, to creep problems. The discretisation procedure is valid for both structured and unstructured meshes thus enabling complex geometries to be modelled. Analytical solutions to engineering problems involving creep often do not exist, therefore, a comparison with the well established numerical solution technique, the finite element method, has been included to provide a benchmark solution. (C) 1998 Elsevier Science Ltd.

引用

页码：1325 / 1338

页数：14

共 21 条

[1]

ANDRADE END, 1910, P ROYAL SOC, V84

[2]

[Anonymous], T ASME

[3] A FINITE-VOLUME PROCEDURE TO SOLVE ELASTIC SOLID MECHANICS PROBLEMS IN 3-DIMENSIONS ON AN UNSTRUCTURED MESH [J].

BAILEY, C ;

CROSS, M .

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 1995, 38 (10) :1757-1776

[4]

BAILEY C, 1993, MATH MODELLING MATER, P259

[5]

Boley B.A., 1960, Theory of Thermal Stresses

[6] A CONSISTENT FORMULATION FOR THE INTEGRATION OF COMBINED PLASTICITY AND CREEP [J].

DUXBURY, P ;

CROOK, T ;

LYONS, P .

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 1994, 37 (08) :1277-1295

[7] STUDY OF 2-DIMENSIONAL CELL-CENTERED AND VERTEX-CENTERED CONTROL-VOLUME SCHEMES APPLIED TO HIGH-TEMPERATURE TIMBER DRYING [J].

FERGUSON, WJ ;

TURNER, IW .

NUMERICAL HEAT TRANSFER PART B-FUNDAMENTALS, 1995, 27 (04) :393-415

[8] A COMPARISON OF THE FINITE-ELEMENT AND CONTROL-VOLUME NUMERICAL-SOLUTION TECHNIQUES APPLIED TO TIMBER DRYING PROBLEMS BELOW THE BOILING-POINT [J].

FERGUSON, WJ ;

TURNER, IW .

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 1995, 38 (03) :451-467

[9] A CONTROL-VOLUME FINITE-ELEMENT NUMERICAL-SIMULATION OF THE HIGH-TEMPERATURE DRYING OF SPRUCE [J].

FERGUSON, WJ .

DRYING TECHNOLOGY, 1995, 13 (03) :607-634

[10]

FUNG LS, 1992, SPE RESERVOIR ENG, V15, P349

← 1 2 3 →