Simulations for gas flows in microgeometries using the direct simulation Monte Carlo method

Micro gas flows are often encountered in MEMS devices and classical CFD could not accurately predict the flow and thermal behavior due to the high Knudsen number. Therefore, the gas flow in microgeometries was investigated using the direct simulation Monte Carlo (DSMC) method. New treatments for boundary conditions are verified by simulations of micro-Poiseuille flow, compared with the previous boundary treatments, and slip analytical solutions of the continuum theory. The orifice flow and the corner flow in microchannels are simulated using the modified DSMC codes. The predictions were compared with existing experimental phenomena as well as predictions using continuum theory. The results showed that the channel geometry significantly affects the microgas flow. In the orifice flow, the flow separation occurred at very small Reynolds numbers. In the corner flow, no flow separation occurred even with a high driving pressure. The DSMC results agreed well with existing experimental information. (C) 2004 Elsevier Inc. All rights reserved.