Creep properties of boron-doped dual-phase Ti-rich L12-based trialuminide intermetallics

被引:10
作者
Heilmaier, M
Handtrack, D
Varin, RA
机构
[1] Univ Waterloo, Dept Mech Engn, Waterloo, ON N2L 3G1, Canada
[2] Plansee AG, Ctr Tech, A-6600 Reutte, Austria
[3] Otto Von Guericke Univ, Dept Mat Engn & Mat Testing, D-39016 Magdeburg, Germany
基金
加拿大自然科学与工程研究理事会;
关键词
boron-doped; dual-phase; Ti-rich L1(2) trialuminide alloys; creep;
D O I
10.1016/S1359-6462(03)00111-8
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The creep behavior of Mn-stabilized, boron-doped, dual-phase Ti-rich trialuminide alloys was investigated in compression at 1100 and 1200 K. Creep properties compare very favorably with those of single-phase. cubic titanium trialuminides and gamma-TiAl-based alloys. The possible creep mechanisms are briefly discussed. (C) 2003 Published by Elsevier Science Ltd. on behalf of Acta Materialia Inc.
引用
收藏
页码:1409 / 1414
页数:6
相关论文
共 24 条
[1]  
Bird J.E., 1969, QUANTITATIVE RELATIO, P255
[2]  
Blum W, 1991, HOT DEFORMATION ALUM, P181
[3]   Solidification microstructures and calculated phase equilibria in the Ti-Al-Mn system [J].
Butler, CJ ;
McCartney, DG ;
Small, CJ ;
Horrocks, FJ ;
Saunders, N .
ACTA MATERIALIA, 1997, 45 (07) :2931-2947
[4]   Phase transformations and phase equilibria in a Ti-37% Al-20% Mn alloy [J].
Butler, CJ ;
McCartney, DG .
INTERMETALLICS, 1999, 7 (06) :663-669
[5]   Creep behavior of γ-TiAl sheet material with differently spaced fully lamellar microstructures [J].
Chatterjee, A ;
Mecking, H ;
Arzt, E ;
Clemens, H .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 329 :840-846
[6]  
CHATTERJEE A, 2001, THESIS U STUTTGART
[7]   Laves phase in Ti-42Al-10Mn alloy [J].
Chen, Z ;
Jones, IP ;
Small, CJ .
SCRIPTA MATERIALIA, 1996, 35 (01) :23-27
[8]  
Clemens H, 2000, ADV ENG MATER, V2, P551, DOI 10.1002/1527-2648(200009)2:9<551::AID-ADEM551>3.0.CO
[9]  
2-U
[10]   A SIMPLE-MODEL OF DEFORMATION OF TI48AL-2CR-2NB AT HIGH-TEMPERATURES [J].
HOFMANN, U ;
BLUM, W .
SCRIPTA METALLURGICA ET MATERIALIA, 1995, 32 (03) :371-376