Mechanical and electrical properties of B4C-CrB2 ceramics fabricated by liquid phase sintering

被引：77

作者：

Yamada, S

Hirao, K

Yamauchi, Y

Kanzaki, S

机构：

[1] Fine Ceram Res Assoc, Synergy Ceram Lab, Nagoya, Aichi 4638687, Japan

[2] Natl Inst Adv Ind Sci & Technol, Synergy Mat Res Ctr, Nagoya, Aichi 4638687, Japan

来源：

CERAMICS INTERNATIONAL | 2003年 / 29卷 / 03期

关键词：

mechanical properties; electrical conductivity; carbide; composite ceramic;

D O I：

10.1016/S0272-8842(02)00120-7

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

B4C based ceramic composites with additions of CrB2 up to 25 mol% were fabricated by hot pressing at 2050 degreesC with a low applied load of 5 MPa. The CrB2 addition enhanced the densification of B4C due to the formation of CrB2-B4C eutectic liquid. Both a high strength of 684 MPa and a modest fracture toughness of 3.2 Mpa m(1/2) were obtained for the B4C-22.5 mol% CrB2 specimen. Furthermore, the electrical conductivity was increased remarkably for the specimens with more than 15 mol% CrB2, which was attributed to the formation of three-dimensional network of the electrically conductive CrB2 phase. (C) 2002 Elsevier Science Ltd and Techna S.r.l. All rights reserved.

引用

页码：299 / 304

页数：6

共 27 条

[1]

JOHNSON JP, 2001, BIOPHYS J, V80, P64

[2]

KANNO Y, 1987, NIPPON SERAM KYO GAK, V95, P1137, DOI 10.2109/jcersj1950.95.1107_1137

[3]

Kim HW, 2000, J AM CERAM SOC, V83, P2863

[4] The effect of tetravalent titanium substitution in LiNi1-xTixO2 (0.025 ≤ x ≤ 0.2) system [J].