Mechanism of sulfate attack: a fresh look Part 2. Proposed mechanisms

被引:292
作者
Santhanam, M
Cohen, MD [1 ]
Olek, J
机构
[1] Purdue Univ, Sch Civil Engn, W Lafayette, IN 47907 USA
[2] Indian Inst Technol, Madras 600036, Tamil Nadu, India
关键词
microstructure; durability; sulfate attack; modeling; mechanism;
D O I
10.1016/S0008-8846(02)00958-4
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
The first paper in this two-part series [Cem. Concr. Res. 32 (2002) 915] summarized the experimental results from a comprehensive research study on sulfate attack. The current paper utilizes these results to develop models for the mechanism of attack resulting from sodium and magnesium sulfate solutions. Implications of changing the binder constituents or the experimental variables, such as concentration and temperature of the solution on the proposed mechanism, are also discussed. The potential of these mechanistic models for use in service life prediction models has also been identified. According to the proposed mechanism, the attack due to sodium sulfate solution progresses in stages. The expansion of an outer skin of the specimen leads to the formation of cracks in the interior region, which is chemically unaltered. With continued immersion, the surface skin disintegrates, and the sulfate solution is able to react with the hydration products in the cracked interior zone leading to the deposition of attack products in this zone. Now, this zone becomes the expanding zone, leading to further cracking of the interior of the mortar. In the case of magnesium sulfate solution, a layer of brucite (magnesium hydroxide) forms on the surface of the mortar specimen. The penetration of the sulfate solution then occurs by diffusion across this surface layer. As the attack progresses, the formation of attack products such as gypsum and ettringite in the paste under the surface leads to expansion and strength loss. The expansion also causes cracking in the surface brucite layer, and this leaves the mortar susceptible to direct attack by the magnesium sulfate solution. Conditions favorable for the decalcification of calcium silicate hydrate (C-S-H) are thus created, and the ultimate destruction of the mortar occurs as a result of the conversion of C-S-H to the noncementitious magnesium silicate hydrate (M-S-H). (C) 2002 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:341 / 346
页数:6
相关论文
共 9 条
[1]  
*ASTM, 1995, E632 ASTM
[2]  
ATKINSON A, 1990, MATER RES SOC SYMP P, V176, P149
[4]  
Ferraris C.F., 1997, Mechanisms of Chemical Degradation of Cement-Based Systems, P185
[6]  
Kurtis KE, 2000, ACI MATER J, V97, P156
[7]  
Ouyang C, 1989, CEMENT CONCRETE AGGR, V11, P92
[8]   Mechanism of sulfate attack: A fresh look Part 1: Summary of experimental results [J].
Santhanam, M ;
Cohen, MD ;
Olek, J .
CEMENT AND CONCRETE RESEARCH, 2002, 32 (06) :915-921
[9]  
SANTHANAM M, 2001, THESIS PURDUE U