Heat flux and heat generation characterisation in a wet-laminar body in microwave-assisted drying:: An application to microwave drying of leather

被引：19

作者：

Monzó-Cabrera, J ^{[1
]}

Díaz-Morcillo, A ^{[1
]}

Catalá-Civera, JM ^{[1
]}

de los Reyes, E ^{[1
]}

机构：

[1] Univ Politecn Valencia, Dept Commun, E-46071 Valencia, Spain

来源：

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER | 2000年 / 27卷 / 08期

关键词：

D O I：

10.1016/S0735-1933(00)00197-4

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

Heat fluxes through a laminar body have been modelled from a parabolic temperature distribution assumption when the material is irradiated with microwaves and immersed in a convective air flow. The heat equation has been analysed and a relationship between thermal conductivity, temperatures and net heat flux through the material surface has been established. This study has been successfully applied to leather hides when they are dried in a combined microwave-hot air oven. With regard to the development of this work, dielectric and temperature measurements have been demonstrated to be of the utmost importance. (C) 2000 Elsevier Science Ltd.

引用

页码：1101 / 1110

页数：10

共 11 条

[1]

Catala-Civera J. M., 1999, IEEE Antennas and Propagation Society International Symposium. 1999 Digest. Held in conjunction with: USNC/URSI National Radio Science Meeting (Cat. No.99CH37010), P1942, DOI 10.1109/APS.1999.788338

[2]

Incropera F. P., 1996, Fundamentals of Heat and Mass Transfer, V6

[3]

KOMANOWSKY M, 1990, J AM LEATHER CHEM AS, V1, P100

[4]

Luikov A.V, 1966, HEAT MASS TRANSFER C

[5]

Metaxas A.C., 1983, IND MICROWAVE HEATIN

[6]

MIKETINAC MJ, 1992, T ASAE, V35, P1853, DOI 10.13031/2013.28806

[7]

Monzó-Cabrera J, 2000, J SOC LEATH TECH CH, V84, P38

[8]

MUJUMDAR AS, 1985, HDB IND DRYING, P1

[9]

Skansi D, 1995, J SOC LEATH TECH CH, V79, P171

[10]

FINITE-ELEMENT MODELING OF HEAT AND MASS-TRANSFER IN FOOD MATERIALS DURING MICROWAVE-HEATING - MODEL DEVELOPMENT AND VALIDATION [J].

ZHOU, L ;

PURI, VM ;

ANANTHESWARAN, RC ;

YEH, G .

JOURNAL OF FOOD ENGINEERING, 1995, 25 (04) :509-529

← 1 2 →