Risk considerations for crown pillar stability assessment for mine closure planning

被引:8
作者
Hutchinson D.J. [1 ,4 ]
Phillips C. [2 ]
Cascante G. [3 ]
机构
[1] Department of Geological Science and Geological Engineering, Queen's University, Kingston
[2] Department of Earth Sciences, University of Waterloo, Waterloo, Ont. N2L 3G1
[3] Civil Engineering Department, University of Waterloo, Waterloo, Ont. N2L 3G1
[4] Formerly with Department of Earth Sciences, University of Waterloo
关键词
Crown pillar; Mine reclamation; Risk assessment; Stability assessment;
D O I
10.1023/A:1013852722768
中图分类号
学科分类号
摘要
Evaluation of the long-term surface stability of crown pillars overlying underground mines is an important component of mine closure planning. The definition of a crown pillar, as well as a brief discussion of the assessment of the probability and consequence of crown pillar failure are given in this paper. Techniques for stability assessment using mechanistic, empirical and numerical simulation techniques are discussed. Consequence assessment is discussed, but is still subjective and difficult to quantify. Where crown pillars are suspected to be marginally stable or unstable either at the time of the investigation or over the long term, and where the consequence of failure is medium to high, the closure plan for the site must include proposed rehabilitation alternatives. Selection of the optimum solution depends largely upon financial considerations, but also upon the common public expectation that the result of mine closure planning be a 'permanent' solution that does not restrict public access or future land use on the site.
引用
收藏
页码:41 / 64
页数:23
相关论文
共 68 条
[1]  
Al-Rawi F.R., Rezkalla J.S., The application of microgravity survey for cave detection in a karstic area, Proceedings of the International Symposium on Large Rock Caverns, pp. 867-876, (1987)
[2]  
Detection of solution cavities using the spectral-analysis-or-surface- waves method, 8th International IAEG Congress, pp. 117-124, (1998)
[3]  
Baker H.A., Abdul Razak M.I., A study of the applicability of VLF Radiohm resistivity method in underground cavity location, Journal of the Geological Society of Iraq, 18, 1, pp. 26-36, (1985)
[4]  
Barton N.R., Lien R., Lunde J., Engineering classification of rock masses for the design of tunnel support, Rock Mech, 6, 4, pp. 189-239, (1974)
[5]  
Beck P.H., Qureshi I.R., Gravity mapping of a subsurface cavity at Marulan, N.S.W, Exploration Geophysics, 20, pp. 481-486, (1989)
[6]  
Belesky R.M., Hardy H.R., Seismic and microseismic methods for cavity detection and stability monitoring of near-surface voids, Proceedings of the 27th U.S. Symposium on Rock Mechanics, Rock Mechanics: Key to Energy Production, pp. 248-258, (1986)
[7]  
Betournay M.C., Mitri H.S., Hassani F., Chimneying disintegration failure mechanisms of hard rock mines, Rock Mechanics Models and Measurements: Challenges From Industry, pp. 987-996, (1994)
[8]  
Bieniawski Z.T., Engineering classification of jointed rock masses, Trans. of the South African Institute of Civil Engineers, 15, 12, pp. 237-247, (1973)
[9]  
Bieniawski Z.T., Engineering Rock Mass Classifications, (1989)
[10]  
Branham K.L., Steeples D.W., Cavity detection using high-resolution seismic reflection methods, Mining Engineering, 40, 1, pp. 115-119, (1988)