Mechanical Behaviour of the Interface Between Cemented Tailings Backfill and Retaining Structures Under Shear Loads

被引：83

作者：

Fall M. ^{[1
]}

Nasir O. ^{[1
]}

机构：

[1] Department of Civil Engineering, University of Ottawa, Ottawa, ON

来源：

Geotechnical and Geological Engineering | 2010年 / 28卷 / 06期

基金：

加拿大自然科学与工程研究理事会;

关键词：

Barricade; Bulkhead; Cement; Cemented paste backfill; Concrete; Interface; Shear strength; Tailings;

D O I：

10.1007/s10706-010-9338-0

中图分类号：

学科分类号：

摘要：

Understanding the shear behaviour of the interface between cemented tailings backfill and retaining wall structures (barricades, bulkheads) is important for the optimal design of barricades or bulkheads, and for mine operators to balance strength and safety against cost. However, our understanding of the shear behaviour of the aforementioned interface is limited. This paper is aimed at investigating the interfacial behaviour and properties of cemented tailings backfill-retaining wall structures, including stress-strain behaviour, cohesion, friction angle and shear stiffness through direct shear tests. Two different types of barricade or bulkhead materials (brick and concrete) are used in this study. Interface shear tests are performed at various curing times of the cemented backfill. Valuable results are obtained with regards to the interface shear behaviour of backfill-retaining structures. Based on these results, interfacial properties between cemented tailings backfill and barricades or bulkheads show a significant time-dependent variation. © 2010 Springer Science+Business Media B.V.

引用

页码：779 / 790

页数：11

共 27 条

[1]

Amaratunga L.M., Yaschyshyn D.N., Development of a high modulus paste fill using fine gold mill tailings, Geotech Geol Eng, 15, pp. 205-219, (1997)

[2]

Archibald F., Hassani F., Nantel F., DeGagne D., Mine backfill, An Operator's Guide-An interactive CD-ROM for mine operators and engineers, (1998)

[3]

Berndt C., Rankine K.J., Sivakugan N., Materials properties of barricade bricks for mining applications, Geotech Geol Eng, 25, pp. 449-471, (2007)

[4]

Bolton M.D., The strength and dilatancy of sands, Geotechnique, 36, 1, pp. 65-78, (1986)

[5]

Brakebusch F.W., Basics of paste backfill systems, Min Eng, 46, pp. 1175-1178, (1994)

[6]

Fall M., Benzaazoua M., Modeling the effect of sulphate on strength development of paste backfill and binder mixture optimization, J Cement Concr Res, 35, 2, pp. 301-314, (2005)

[7]

Fall M., Samb S., Influence of curing temperature on strength, deformation behaviour and pore structure of cemented paste backfill at early ages, J Build Constr mater, (2006)

[8]

Fall M., Benzaazoua M., Ouellet S., Experimental characterization of the influence of tailings fineness and density on the quality of cemented paste backfill, Miner Eng, 18, pp. 41-44, (2005)

[9]

Fall M., Belem T., Samb S., Benzaazoua M., Experimental characterization of the stress-strain behaviour of cemented paste backfill in compression, J Mater Sci, 42, 11, pp. 3914-3992, (2007)

[10]

Fall M., Benzaazoua M., Sae E., Mix proportioning of underground cemented paste backfill, Int J Tunn Undergr Constr, 23, pp. 80-90, (2008)

← 1 2 3 →