Processing-property-microstructure relationships in TiAl-based alloys

The influence of thermomechanical processing on the microstructure of a range of TiAl-based alloys has been assessed using optical and electron microscopy, and the room-temperature mechanical properties have been determined. Long-term exposure at high temperatures has been used to assess the thermal stability of some of the structures generated through the different processing routes, and it has been found that the (gamma and alpha 2) lamellar structures, in some of the alloys, are unstable at 700 °C, a likely operating temperature. Addition of boron increases the stability of the lamellar structure. The influence of the difficulty of slip transfer between gamma and alpha 2 has been assessed as one of the factors limiting ductility in samples with this lamellar structure. In addition to the alloys produced via the ingot route, some atomized material has been produced and the microstructure and properties of hot-isostatically pressed “hipped” material assessed. Regions, high in titanium, are present in all atomized powders that have been examined, and these regions are found to initiate fracture at very low strains. These results are briefly discussed in terms of the factors that control the room-temperature strength and fracture behavior of TiAl-based alloys.