The correlation of vibration signal features to cutting tool wear in a metal turning operation

被引：112

作者：

Dimla Snr. D.E. ^{[1
]}

机构：

[1] School of Engineering and Technology, De Montfort University, Leicester

来源：

International Journal of Advanced Manufacturing Technology | 2002年 / 19卷 / 10期

关键词：

Metal turning; Tool condition monitoring; Vibration signals; Wear measurements;

D O I：

10.1007/s001700200080

中图分类号：

学科分类号：

摘要：

This paper describes a tool-wear monitoring procedure in a metal turning operation using vibration features. Machining of EN24 was carried out using coated grooved inserts, and on-line vibration signals were obtained. The measured tool-wear forms were correlated to features in the vibration signals in the time and frequency domains. Analysis of the results suggested that the vibration signals' features were effective for use in cutting tool-wear monitoring and wear qualification.

引用

页码：705 / 713

页数：8

共 17 条

[1] Dimla D.E. Sr., Multivariate tool condition monitoring in a metal cutting operation using neural networks, (1998)
[2] Dimla D.E. Sr., Lister P.M., On-line metal cutting tool condition monitoring - Part I: Force and vibration analyses, International Journal of Machine Tools and Manufacture, 40, 8, pp. 736-768, (2000)
[3] Lister P.M., On-line measurement of tool wear, (1993)
[4] Dimla D.E. Jr., Lister P.M., Leighton N.J., Neural network solutions to the tool condition monitoring problem - A critical review of methods, International Journal of Machine Tools and Manufacture, 37, 9, pp. 1219-1242, (1997)
[5] Dimla D.E. Sr., Sensor signals for tool wear monitoring in metal cutting operations - A review of methods, International Journal of Machine Tools and Manufacture, 40, 8, pp. 1073-1098, (2000)
[6] Byrne G., Dornfeld D., Inasaki I., Ketteler G., Konig W., Teti R., Tool condition monitoring (TCM) - The status of research and industrial application, Annals CIRP, 44, 2, pp. 541-567, (1995)
[7] Saini D.P., Park Y.J.A., Quantitative model of acoustic emissions in orthogonal cutting operations, Journal of Materials Processing Technology, 58, pp. 343-350, (1996)
[8] Quadro A.L., Branco J.R.T., Analysis of the acoustic emission during drilling test, Surface and Coatings Technology, 93-94, 1-3, pp. 691-695, (1997)
[9] Dolinsek S., Kopac J., Acoustic emission signals for tool wear identification, Wear, 225, 1, pp. 295-303, (1999)
[10] Kim J.-S., Kang M.-C., Ryu B.-J., Ji Y.-K., Development of an on-line tool life monitoring system using acoustic emission signals in gear shaping, International Journal of Machine Tools and Manufacture, 39, 11, pp. 1761-1777, (1999)

← 1 2 →