Design of robust intelligent protection technique for large-scale grid-connected wind farm

被引：43

作者：

Noureldeen O. ^{[1
]}

Hamdan I. ^{[1
]}

机构：

[1] Electrical Engineering Department, Faculty of Engineering, South Valley University, Qena

来源：

Noureldeen, Omar (omar_noureldeen@svu.edu.eg) | 2018年 / Springer卷 / 03期

关键词：

Active power; ANFIS; DFIG; Fault location; Reactive power; Wind farm;

D O I：

10.1186/s41601-018-0090-4

中图分类号：

学科分类号：

摘要：

This paper presents a design of robust intelligent protection technique using adaptive neuro-fuzzy inference system (ANFIS) approach to detect and classify the fault types during various faults occurrence in large-scale grid-connected wind farm. Also, it is designed to determine the fault location and isolate the wind turbine generators located in the faulted zone during fault occurrence and reconnect them after fault clearance. The studied wind farm has a total rating capacity of 120 MW, where it consists of 60 doubly fed induction generator (DFIG) wind turbines each has a capacity of 2 MW. Moreover, the wind farm generators are positioned in 6 rows, where each row consists of 10 generators. The impacts of fault type, fault location, fault duration, cascaded faults, permanent fault and external grid fault on the behaviours of the generated active and reactive power are investigated. Also, the impacts of internal and external faults in cases of different transition resistances are investigated. The simulation results indicate that, the proposed ANFIS protection technique has the ability to detect, classify and determine the fault location, then isolate the faulted zones during fault occurrence and reconnect them after fault clearance. Furthermore, the wind turbines generators which are located in un-faulted zones can stay to deliver their generated active power to the grid during fault period. © 2018, The Author(s).

引用

共 47 条

[1]

Hameed Z., Ahn S.H., Cho Y.M., Practical aspects of a condition monitoring system for a wind turbine with emphasis on its design, system architecture, testing and installation, Renewable Energy, 35, 5, pp. 879-894, (2010)

[2]

Boynuegri A.R., Vural B., Tascikaraoglu A., Uzunoglu M., Yumurtaci R., Voltage regulation capability of a prototype static VAr compensator for wind applications, Applied Energy, 93, pp. 422-431, (2012)

[3]

Pedro F., Marquez G., Mark A., Maria J., Perez P., Papaelias M., Condition monitoring of wind turbines: Techniques and methods, Renewable Energy, 46, pp. 169-178, (2012)

[4]

Evangelista C., Valenciaga F., Puleston P., Active and reactive power control for wind turbine based on a MIMO 2-sliding mode algorithm with variable gains, IEEE Transactions on Energy Conversion, 28, 3, pp. 682-689, (2013)

[5]

Zhao Y., Chai J., Sun X., Relative voltage control of the wind farms based on the local reactive power regulation, Energies, 10, 281, pp. 1-13, (2017)

[6]

Banshwar A., Sharma N.K., Sood Y.R., Shrivastava R., Optimal location and rating of wind power plants in competitive electricity market, J Renew Sustain ENERGY, 9, 43306, pp. 1-14, (2017)

[7]

Mohamed M.A., Eltamaly A.M., Alolah A.I., Swarm intelligence-based optimization of grid-dependent hybrid renewable energy systems, Renewable and Sustainable Energy Reviews, 77, pp. 515-524, (2017)

[8]

Slootweg J.G., De Haan S.W.H., Polinder H., General model for representing variable speed wind turbines in power system dynamics, IEEE Transactions on Power Apparatus and Systems, 18, 1, pp. 144-151, (2003)

[9]

Acakpovi A., Ben Hagan E., A wind turbine system model using a doubly-fed induction generator (DFIG), International Journal of Computers and Applications, 90, 5, pp. 6-11, (2014)

[10]

Chakrawarti P., Jain P.P., Performance analysis of DFIG wind turbine, International Journal of Recent Research in Electrical and Electronics Engineering, 2, 1, pp. 1-9, (2015)

← 1 2 3 4 5 →