Industry case studies in the use of immersive virtual assembly

被引：42

作者：

Jayaram S. ^{[1
]}

Jayaram U. ^{[1
]}

Kim Y.J. ^{[1
]}

DeChenne C. ^{[1
]}

Lyons K.W. ^{[2
]}

Palmer C. ^{[3
]}

Mitsui T. ^{[4
]}

机构：

[1] VRCIM Laboratory, School of Mechanical and Materials Engineering, Washington State University, Pullman, WA

[2] NIST, Gaithersburg, MD

[3] PACCAR Technical Center, Mt. Vernon, WA

[4] Komatsu Ltd., Tokyo

来源：

Virtual Reality | 2007年 / 11卷 / 4期

关键词：

Industry case study; VADE; Virtual assembly;

D O I：

10.1007/s10055-007-0070-x

中图分类号：

学科分类号：

摘要：

In this paper, we report on two engineering case studies that have been conducted as part of a Virtual Assembly Technology Consortium. The objectives of the case studies were to determine if immersive virtual assembly capabilities allow industry assembly situations to be modelled and studied realistically, and to demonstrate the downstream value of the virtual assembly capabilities in areas such as ergonomics, assembly installation, process planning, installation, and serviceability. What is of special significance is that instead of modelling simplified problems or perceived representative situations, the case studies were constructed from actual assembly floor projects and situations encountered at industry member sites and with considerable participation from industry engineers and manufacturing shop floor personnel. Based on the success of the case studies, the consortium members inferred that virtual assembly methods are poised to move out of the realm of special projects and test scenarios to deployment in the actual design and manufacturing cycle. However, in order to be truly accepted in industry, there are still issues to be addressed in terms of ease of use, portability of the applications, and preparation of the models for the evaluations. Thus, the case studies added a new dimension to the exploration and understanding of how this new technology could be of practical value in industry. © Springer-Verlag London Limited 2007.

引用

页码：217 / 228

页数：11

共 31 条

[1]

Adam S.C., Scott D.M., Bert B., A haptic assembly and disassembly simulation environment and associated computational load optimization techniques, J Comput Inf Sci Eng, 1, 2, pp. 113-122, (2001)

[2]

Bullinger H.J., Richter K., Seidel A., Virtual assembly planning, Hum Factors Ergon Manuf, 10, 3, pp. 331-341, (2000)

[3]

Choi A.C.K., Chan D.S.K., Yuen M.F., Applications of virtual assembly tools for improving product design, Int J Adv Manuf Technol, 19, 5, pp. 377-383, (2002)

[4]

An Open Source Virtual Reality Toolkit, (2007)

[5]

Dewar R.G., Carpenter I.D., Ritchie J.M., Simmons J.E.L., Assembly planning in a virtual environment, PICMET '97: Portland International Conference on Management and Technology, (1997)

[6]

Jayaram S., Connacher H., Lyons K., Virtual assembly design environment, Proceedings of ASME Design Technical Conferences/international Computers in Engineering Conference, (1995)

[7]

Jayaram S., Jayaram U., Wang Y., Lyons K., Hart P., VADE: A virtual assembly design environment, IEEE Comput Graph Appl, 19, 6, pp. 44-50, (1999)

[8]

Jayaram S., Vance J., Gadh R., Jayaram U., Srinivasan H., Assessment of VR Technology and its Applications to Engineering Problems, J Comput Inf Sci Eng, 1, 1, pp. 72-88, (2001)

[9]

Jayaram U., Jayaram S., DeChenne C., Kim Y., Palmer C., Mitsui T., Case studies using immersive virtual assembly in industry, Proceedings of ASME/DETC 2004-57714, (2004)

[10]

Jayaram U., Kim Y., Jayaram S., Jandhyala K., Mitsui T., Reorganizing CAD assembly models (as-designed) for manufacturing simulations and planning (as-built), J Comput Inf Sci Eng, 4, 2, pp. 98-108, (2004)

← 1 2 3 4 →