Development and prospect on fully mechanized mining in Chinese coal mines

被引：124

作者：

Wang J. ^{[1
]}

机构：

[1] China Coal Technology & Engineering Group Corp, Beijing

来源：

International Journal of Coal Science & Technology | 2014年 / 1卷 / 3期

关键词：

Backfilling mining; Fully mechanized mining; Fully mechanized top coal caving; Mining with large shear height; Prospect; Steeply inclined seam;

D O I：

10.1007/s40789-014-0017-2

中图分类号：

学科分类号：

摘要：

Fully mechanized mining (FMM) technology has been applied in Chinese coal mines for more than 40 years. At present, the output of a FMM face has reached 10-million tons with Chinese-made equipment. In this study, the new developments in FMM technology and equipment in Chinese coal mines during past decades are introduced. The automatic FMM technology for thin seams, complete sets of FMM technology with ultra large shear height of 7 m for thick seams, complete sets of fully mechanized top coal caving technology with large shear height for ultra-thick seams of 20 m, complete sets of FMM technology for complex and difficult seams, including steeply inclined seams, soft coal seams with large inclination angle, and the mechanized filling mining technology and equipment are presented. Some typical case studies are also introduced. Finally, the existing problems with the FMM technology are discussed, and prospect of FMM technology and equipment applied in Chinese coal mines is put forward. © 2014, The Author(s).

引用

页码：253 / 260

页数：7

共 16 条

[1]

Fan Y.C., Some mining methods for steep inclined difficult seams. National technical symposium of coal mines on the mining of complex difficult seams, Chengdu, pp. 66-68, (2012)

[2]

Feng G.M., Research on the superhigh-water packing material and filling mining technology and their application. Doctor’s thesis, China University of Mining &, (2009)

[3]

Hu B.N., Backfill mining technology and development tendency in China coal mine, Coal Sci Technol, 40, 11, pp. 1-5, (2012)

[4]

Huang Z.Z., Ren Y.F., Zhang H.J., Study on key technology of fully mechanized top coal caving in extra-thick soft coal seam with great dip angle, J China Coal Soc, 35, 11, pp. 1878-1882, (2010)

[5]

Liu J.G., Application and study on backfill mining technology and equipment in deep mine with depth over 1000 m, Coal Sci Technol, 41, 9, pp. 1-5, (2013)

[6]

Mao D.B., Kang L.J., High cutting fully-mechanized mining and application feasibility, Coal Min Technol, 8, 1, pp. 11-14, (2003)

[7]

Mao D.B., Lan H., Xu G., Thin coal-seam mechanized mining status and new development of China, Min Technol, 16, 3, pp. 11-14, (2011)

[8]

Miao X.X., Progress of fully mechanized mining with solid backfilling technology, J China Coal Soc, 37, 8, pp. 1247-1255, (2012)

[9]

Ning Y., Innovating safe and high-efficiency coal mining technology and supporting extra-large mine construction, Coal Min Technol, 16, 3, pp. 1-3, (2011)

[10]

Ning Y., Fully-mechanized high cutting mining technology and equipment in China, (2012)

← 1 2 →