Trust and the use of adaptive cruise control: A study of a cut-in situation

被引：52

作者：

Rajaonah B. ^{[1
]}

Anceaux F. ^{[1
]}

Vienne F. ^{[2
]}

机构：

[1] CNRS LAMIH PERCOTEC le Mont Houy

[2] INRETS-CIR-MSIS, 94114 Arcueil, 2, Ave. du Gen. Malleret-Joinville

来源：

Cognition, Technology & Work | 2006年 / 8卷 / 2期

关键词：

Adaptive cruise control; Cut-in-situation; Driving simulator; Questionnaire; Trust;

D O I：

10.1007/s10111-006-0030-3

中图分类号：

学科分类号：

摘要：

This paper analyses driver trust and performance when using adaptive cruise control (ACC) in a situation involving a truck cutting into the lane in front of the ACC-equipped vehicle. The study was carried out using a mini driving simulator and a simulated ACC whose reference speed and time headway (THW) were preset to 130 km/h and 1.5 s, respectively. Questionnaires were used to analyse driver trust. Two kinds of drivers emerge from the analysis of driver behaviour during the cut-in situation: drivers who reclaimed control from the ACC before the device began to regulate the THW with regard to the truck, and drivers who braked after the device had begun its regulation. The latter demonstrated a higher level of trust in the ACC device itself while the former had a higher level of trust in the cooperation with the device. These findings are discussed in terms of over-reliance and well-calibrated trust.

引用

页码：146 / 155

页数：9

共 26 条

[1]

Bisantz A.M., Seong Y., Assessment of operator trust in and utilization of automated decision-aids under different framing conditions, Int J Ind Ergon, 28, pp. 85-97, (2001)

[2]

Boer E.R., Hoedemaeker M., Modeling driver behavior with different degrees of automation: A hierarchical decision framework of interacting mental models, Proceedings of the XVIIth European Annual Conference on Human Decision Making and Manual Control, pp. 14-16, (1998)

[3]

Cohen M.S., Parasuraman R., Freeman J.T., Trust in Decisions Aids: A Model and its Training Implication, (1998)

[4]

Dzindolet M.T., Beck H.P., Pierce L.G., Dawe L.A., A Frame-work of Automation Use (Rep. No. ARL-TR-2412), ARL-TR-2412, (2001)

[5]

Dzindolet M.T., Peterson S.A., Pomranky R.A., Pierce L.G., Beck H.P., The role of trust in automation reliance, Int J Hum Comput Stud, 58, pp. 697-718, (2003)

[6]

Espie S., Rajaonah B., Auberlet J.M., Vienne F., How to evaluate the driver's trust in ITS? Example of ACC, 4th ITS in Europe 2004 Congress and Exhibition, (2004)

[7]

Goodrich M.A., Boer E.R., Model-based human-centered task automation: A case study in ACC system design, IEEE Trans Syst Man Cybern a Syst Hum, 33, pp. 325-336, (2003)

[8]

Hoedemaeker M., Brookhuis K.A., Behavioural adaptation to driving with an adaptive cruise control (ACC), Transportation Res F, 1, pp. 95-106, (1998)

[9]

Hollnagel E., Woods D.D., Cognitive systems engineering: New wine in new bottles, Int J Man Mach Stud, 18, pp. 583-600, (1983)

[10]

Jian J.Y., Bisantz A.M., Drury C.G., Foundations for an empirically determined scale of trust in automated systems, Int J Cogn Ergon, 4, pp. 53-71, (2000)

← 1 2 3 →