TAILORING MATERIALS WITH PRESCRIBED ELASTIC PROPERTIES

This paper describes a method to design the periodic microstructure of a material to obtain prescribed constitutive properties. The microstructure is modelled as a truss or thin frame structure in 2 and 3 dimensions. The problem of finding the simplest possible microstructure with the prescribed elastic properties can be called an inverse homogenization problem, and is formulated as an optimization problem of finding a microstructure with the lowest possible weight which fulfils the specified behavioral requirements. A full ground structure known from topology optimization of trusses is used as starting guess for the optimization algorithm. This implies that the optimal microstructure of a base cell is found from a truss or frame structure with 120 possible members in the 2-dimensional case and 2016 possible members in the 3-dimensional case. The material parameters are found by a numerical homogenization method, using Finite-Elements to model the representative base cell, and the optimization problem is solved by an optimality criteria method. Numerical examples in two and three dimensions show that it is possible to design materials with many different properties using base cells modelled as truss or frame works. Hereunder is shown that it is possible to tailor extreme materials, such as isotropic materials with Poisson's ratio close to - 1, 0 and 0.5, by the proposed method. Some of the proposed materials have been tested as macro models which demonstrate the expected behaviour.