THE PHASE-TRANSFORMATIONS IN ALLOYS BASED ON TITANIUM ALUMINIDES TI3AL-V AND TIAL-V

被引:34
作者
AHMED, T
FLOWER, HM
机构
[1] Department of Materials, Imperial College, London
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 1992年 / 152卷 / 1-2期
关键词
D O I
10.1016/0921-5093(92)90042-Y
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Vanadium is an element of interest in terms of improving the mechanical properties of Ti3Al (alpha-2) and TiAl (gamma). Therefore, it is important to study the phase equilibria between titanium, aluminium and vanadium. Titanium alloys of compositions 10.5-57 wt.% Al and 4-51 wt.% V were prepared and then heat treated at temperatures of 1473, 1173, 1073, 973 and 873 K. The microstructures were identified by using conventional techniques. The compositions of the identified phases in the bulk and thin foil samples were determined by microprobe analysis. Five isothermal sections of Ti-Al-V ternary diagram were established at these temperatures. The effect of the oxygen content of alloys on the phase boundaries of alpha, beta and gamma-phases was also determined at 1473 K.
引用
收藏
页码:31 / 36
页数:6
相关论文
共 14 条
[1]  
BLACKBURN MJ, 1981, Patent No. 20600694
[2]  
ENCE E, 1961, T METALL SOC AIME, V221, P151
[3]  
FARRAR PA, 1961, T METALL SOC AIME, V221, P1214
[4]   EFFECTS OF 3RD ELEMENTS ON THE STRUCTURES OF TIAL-BASED ALLOYS [J].
HASHIMOTO, K ;
DOI, H ;
KASAHARA, K ;
TSUJIMOTO, T ;
SUZUKI, T .
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1988, 52 (08) :816-825
[5]  
Hashimoto K., 1986, Transactions of the Japan Institute of Metals, V27, P741
[6]   CHARACTERIZATION OF THE EFFECT OF VANADIUM ADDITIONS TO TIAL BASE ALLOYS [J].
HUANG, SC ;
HALL, EL .
ACTA METALLURGICA ET MATERIALIA, 1991, 39 (06) :1053-1060
[7]  
KORNILOV II, 1968, TITANIUM ALLOYS NEW, P78
[8]  
MAEDA T, 1988, THESIS U LONDON
[9]  
MASSALSKII TB, 1986, BINARY ALLOY PHASE D, P180
[10]   PHASE-EQUILIBRIA AND SOLIDIFICATION IN TI-AL ALLOYS [J].
MCCULLOUGH, C ;
VALENCIA, JJ ;
LEVI, CG ;
MEHRABIAN, R .
ACTA METALLURGICA, 1989, 37 (05) :1321-1336