EVALUATION OF A PASSIVE SAMPLER FOR AIRBORNE FORMALDEHYDE

A diffusive sampler for the large scale routine determination of airborne formaldehyde was developed. Formaldehyde is sampled in a badge-type passive sampler containing a 2,4-dinitrophenylhydrazine-coated filter paper as sampling layer. Formaldehyde is immediately converted to the corresponding hydrazone, which, after desorption with acetonitrile, is separated and quantified by gradient HPLC using UV detection at 345 nm. Calibration was done via an active sampling method and showed an excellent, time- and concentration-independent linear performance of the diffusive samplers. A detection limit of about 0.05 ml/m3 . h (ppm . h) and a relative standard deviation of about 10% ensured a good analytical reliability. By testing the influence of air movements at the sampler surface, a minimum air velocity of 10 cm/s was found necessary to ensure representative sampling.