STRENGTHS OF CERAMIC FIBERS AT ELEVATED-TEMPERATURES

被引:142
作者
PYSHER, DJ
GORETTA, KC
HODDER, RS
TRESSLER, RE
机构
[1] Department of Materials Science and Engineering, Pennsylvania State University, University Park, PA 16802, United States
[2] Argonne National Laboratory, Argonne, IL, United States
[3] Tusonix, Inc., Tuscon, AZ, United States
关键词
Tensile strength - Thermooxidation - Ceramic materials - Elastic moduli - Fibers;
D O I
10.1111/j.1151-2916.1989.tb06115.x
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Tensile strengths were measured and Young's moduli were estimated for two SiC-based and three oxide ceramic fibers for temperatures from 25° to 1400°C. The SiC-based fibers were stronger but less stiff than the oxide fibers at room temperature and retained more of both strength and stiffness to high temperatures. High-temperature strengths of the SiC-based fibers were limited by internal void formation and oxidation; those of the oxide fibers were limited by softening of an intergranular glassy phase.
引用
收藏
页码:284 / 288
页数:5
相关论文
共 18 条
  • [1] SILICON-CARBIDE FIBERS AND THEIR POTENTIAL FOR USE IN COMPOSITE-MATERIALS .1.
    ANDERSSON, CH
    WARREN, R
    [J]. COMPOSITES, 1984, 15 (01): : 16 - 24
  • [2] MECHANICAL AND STRUCTURAL CHARACTERIZATION OF NICALON SIC FIBERS UP TO 1300-DEGREES-C
    BUNSELL, AR
    SIMON, G
    [J]. COMPOSITES SCIENCE AND TECHNOLOGY, 1986, 27 (02) : 157 - 171
  • [3] BUTT DP, 1984, THESIS PENNSYLVANIA
  • [4] CLARK TJ, 1986, CERAM ENG SCI P, V7, P901
  • [5] CLARK TJ, 1985, CERAM ENG SCI P, V6, P576
  • [6] DHINGRA AK, 1980, T R SOC LONDON A, V294, P1411
  • [7] FITZER E, 1980, HIGH TEMP SCI, V13, P149
  • [8] GORETTA KC, UNPUB
  • [9] JONSON DD, 1987, CERAM ENG SCI P, V8, P744
  • [10] THERMAL-STABILITY OF SIC FIBERS (NICALON)
    MAH, T
    HECHT, NL
    MCCULLUM, DE
    HOENIGMAN, JR
    KIM, HM
    KATZ, AP
    LIPSITT, HA
    [J]. JOURNAL OF MATERIALS SCIENCE, 1984, 19 (04) : 1191 - 1201