STRUCTURAL-CHANGE INDUCED BY WETTING AND DRYING IN SEEDBEDS OF A HARDSETTING SOIL WITH CONTRASTING AGGREGATE SIZE DISTRIBUTION

Hardsetting has been related to two main processes: (i) development of strength when the soil is still moist (- 100 kPa) due to matric suction acting within interparticle and interaggregate bridges and (ii) temporary cementation of dry soil by poorly ordered silica and aluminosilicates. In both cases, hardsetting of a seedbed should depend on geometric aspects of macro- and micro-structure. This study deals with aggregate breakdown and/or deformation on wetting and with the structural changes which follow on drying. Repacked seedbeds of a hardsetting red-brown earth were wetted by capillary rise. Seedbeds with a coarse and a fine aggregate size distribution were examined. Before and after wetting, the bulk density of the seedbeds was measured at 5-mm increments using a gamma probe. Replicate samples were air dried, gamma scanned and impregnated. Binary images of pore space (> 107 mu m) of vertical faces were used to generate depth functions of structure attributes, including macroporosity. Bulk density measurements combined with image analysis resulted in successful structure characterization. Thin-section observations were used to interpret the quantified changes in terms of physical processes. In both coarse and fine seedbeds the physical processes which determined structural change occurred upon wetting rather than on drying. Coalescence of aggregates under plastic conditions, partly due to overburden pressure and enhanced by microcracking and partial slaking, occurred at the bottom of the coarse seedbed. Ln the fine seedbed, the fine material agglomerated due to matric suction. These different processes led to rather similar, microporous microstructures which exhibited similar strength properties after drying.