A CORRELATION BETWEEN DEVIATIONS IN FORM AND SIZE TOLERANCES

被引：2

作者：

COGUN, C

机构：

[1] Mechanical Engineering Department, Middle East Technical University, Ankara

[2] Mechanical Engineering Department, King Saud University, Riyadh, 11421

来源：

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH | 1991年 / 29卷 / 05期

关键词：

Machine Tools - Selection - Precision Engineering - Surfaces - Roughness Measurement;

D O I：

10.1080/00207549108930116

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

It is often necessary to prescribe size and form tolerances when specific workpiece accuracy is demanded. On the basis of published data and investigations carried out by the author, a correlation has been developed between deviations in form and International Organization for Standardization (ISO) tolerances. The range of application is for nominal sizes up to 10000 mm and for tolerance grades 4-16. This correlation can help toolmakers choose the size of form tolerances when specific workpiece accuracy is required. The proposed correlation is verified by measurements of the fitting of workpieces for industrial production and the evaluation of measuring data.

引用

页码：1017 / 1023

页数：7

共 15 条

[1]

Abramovitz M., Stegun I.A., Handbook of Mathematical Functions, (1965)

[2]

Bain L.I., Statistical Analysis of Reliability and Life Testing Models, (1978)

[3]

Bury K.Y., Statistical Models, (1975)

[4]

Ikert J., Form- und Lagetoleranzen, Werkstattstech, 48, 8, pp. 428-434, (1958)

[5]

Ikert J., Form- und Lageabweichungen und Ihre Messung, Werkstattstech. Maschinenbau, 54, 9, (1964)

[6]

System of Limits and Fits, (1962)

[7]

Technical Drawings: Geometrical Tolerancing

[8]

Tolerances Ofform, Orientation, Location and Run-Out: Generalities, Definitions, Symbols, Indications of Drawings, (1980)

[9]

Kenzle D., Formtoleranzen. Werkstattstech, Maschinenbau, 45, 11, pp. 605-607, (1955)

[10]

Kohage E., Die Werkstuckgenauigkeit in der Spanabhebenden Fertigung, Lndustrie Anzieger, 85, 2, pp. 21-26, (1963)

← 1 2 →