THE YIELD STRESS OF FIBER SUSPENSIONS

Yield stresses were determined for commercial wood pulp suspensions and synthetic fibre suspensions of low and medium mass concentration. The yield stresses measured represent interfibre failure of the network rather than failure between the suspension and a solid surface. The measurements were carried out in a rotary viscometer at low yield stresses and in a concentric rotary shear tester at yield stresses in excess of 2500 Pa. The experimental results were correlated with the volumetric concentration Cv in equations of the form τy = aCbv where a and b are constant for a given fibre type. It was found that b ≃ 3, in agreement with the predictions of a theoretical model of fibre network strength based upon the interlocking of elastically bent fibres. The dependence of the yield stress on the fibre properties of aspect ratio and modulus of elasticity was not adequately predicted by the model, suggesting that fibre bending alone did not account for the network strength over the concentration range studied. Copyright © 1990 Canadian Society for Chemical Engineering