ADAPTIVE DECOUPLING CONTROL OF INDUCTION-MOTOR DRIVES

被引:35
作者
CHAN, CC
LEUNG, WS
NG, CW
机构
[1] Department of Electrical and Electronic Engineering, University of Hong Kong, Hong Kong
关键词
D O I
10.1109/41.45842
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
A novel control approach for a robust induction motor drive system with a voltage source inverter has been developed. In the scheme, the induction motor and its corresponding inverter gating signal are controlled based on the decoupling control theory. In addition, an adaptive optimal speed regulator employing the model reference adaptive control (MRAC) is incorporated into the drive system to compensate for unfavorable errors. The principles and special features of the control scheme are discussed, and the configuration of the drive system is presented. Comparison is made between conventional proportional plus integral (PI) control and the MRAC. Test results showed the robustness and superior dynamic performance of the proposed control system. © 1990 IEEE
引用
收藏
页码:41 / 47
页数:7
相关论文
共 7 条
[1]  
Ohnishi K., Suzuki H., Miyachi K., Decoupling control of secondary flux and secondary current in induction motor drive with controlled voltage source and its comparison with volt/hertz control, IEEE Trans. Ind. Appl., IA-21, pp. 241-247, (1985)
[2]  
Ohnishi K., Ueda Y., Miyachi K., Model reference adaptive system against rotor resistance variation in induction motor drive, IEEE Trans. Ind. Electron., IE-33, pp. 217-223, (1986)
[3]  
Landau Y.D., Adaptive Control: The Model Reference Approach, (1979)
[4]  
Garces L.J., Parameter adaption for the speed-controlled static acdrive with a squirrel-cage induction motor, IEEE Trans. Ind. Appl., IA-16, pp. 173-178, (1980)
[5]  
Miyazaki M., Knroiwa A., Kudor T., High-performance vector control drive system by microprocessor-based current source inverter, Proc. IEEE IECON '84, 821, pp. 821-826
[6]  
Tsuji M., Yamada E., Izumi K., Oyama J., Modelling of a current source inverter-fed induction motor under vector control, Proc. IEEE IECON '84, pp. 827-832
[7]  
Floter W., Ripperger H., Field-oriented closed-loop control of an induction machine with the new transvektor control system, Siemens Rev., 6, pp. 248-252, (1972)