DIRECT VOLUMETRIC ERROR EVALUATION FOR MULTIAXIS MACHINES

被引：41

作者：

LIN, PD

EHMANN, KF

机构：

[1] Mechanical Engineering Department, Northwester University, Evanston, IL 60208

来源：

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 1993年 / 33卷 / 05期

关键词：

D O I：

10.1016/0890-6955(93)90100-9

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A generalized methodology, referred to as direct error analysis, for the evaluation of the position and orientation errors in the workspace of a multi-axis machine of arbitrary configuration was formulated based on two important new concepts. First, a modified coordinate frame assignment rule was defined. This rule offers the ability to assign the origins of the joint frames at the physical joint so that the corresponding homogeneous transformation matrices can overcome the problem with the conventional Denavit-Hartenberg rule with respect to small variations in link geometry. Second, the concepts of fixed and moving error reference frames for kinematic error motions were introduced. Depending on the joint configuration these frames facilitate the representation of the true kinematic error motions at both ends of the physical link.

引用

页码：675 / 693

页数：19

共 17 条

[1]

Schultschik, The components of the volumetric accuracy, Ann. CIRP, 25, pp. 223-228, (1977)

[2]

Duffour, Groppetti, Computer aided accuracy improvement in large NC machine tools, MTDR Conf. Proc., 22, pp. 611-618, (1981)

[3]

Ferreira, Liu, An analytical quadratic model for the geometric error of a machine tool, J. Mfg Syst., 5, pp. 51-63, (1986)

[4]

Denavit, Hartenberg, A kinematic notation for lower-pair mechanisms based on matrices, J. Appl. Mech., 22, pp. 215-221, (1955)

[5]

Ramesh, Magrab, A general procedure to evaluate robot positioning errors, The International Journal of Robotics Research, 6, pp. 59-74, (1987)

[6]

Chen, Wang, Yang, Robot position accuracy improvement through kinematic parameter identification, 3rd Canadian CAD/CAM Robot Conf., pp. 4.7-4.12, (1985)

[7]

Sata, Takechi, Okubo, Improvement of working of a machining center by computer control compensation, MTDR Conf. Proc., 28, pp. 93-97, (1987)

[8]

Wu, A kinematic CAD tool for the design and control of robot manipulators, The International Journal of Robotics Research, 3, (1984)

[9]

Wu, Robot accuracy analysis based on kinematics, IEEE J. Robotics Autom., 1, pp. 171-179, (1986)

[10]

Eman, Wu, DeVries, A generalized geometric error model for multi-axis machine, Ann. CIRP, 36, pp. 253-256, (1987)

← 1 2 →