EXPERIMENTS ON THE EFFECT OF MATERIAL PROPERTIES ON MICROCUTTING PROCESSES

被引：20

作者：

MORONUKI, N

LIANG, Y

FURUKAWA, Y

机构：

[1] Faculty of Technology, Tokyo Metropolitan University, Tokyo

来源：

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY | 1994年 / 16卷 / 02期

关键词：

ULTRAPRECISE MACHINING; MICROCUTTING PROCESS; CHIP FORMATION; MATERIAL PROPERTIES; ANISOTROPY;

D O I：

10.1016/0141-6359(94)90197-X

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The influence of workpiece material properties on microcutting processes were investigated in order to clarify the chip formation mechanism. Experiments were performed either with a constant depth of cut or a continuously increasing method with tool advance. The results obtained are as follows: (a) When the depth of cut is kept less than a micron, the material crystal structure affects the result. Polycrystal material must be treated as discrete and heterogeneous. Single crystal material is continuous and homogeneous, but anisotropic characteristics must be taken into consideration. (b) The behavior at the beginning of chip formation was influenced by the anisotropy, and the surface integrity varied with crystal orientation.

引用

页码：124 / 131

页数：8

共 11 条

[1]

Donaldson, Riddle, Syn, Taylor, Chip science: basic study on the single cutting process, Engineering Research Annual Report FY86. Lawrence Livermore National Laboratory Rept., (1986)

[2]

Hoover, Hoover, Stowers, Siekhaus, Interface tribology via non equilibrium molecular dynamics, MRS Proceedings, 140, pp. 119-124, (1989)

[3]

Belak, Hoover, Hoover, De Groot, Stowers, Molecular dynamics modeling applied to indentation and metal cutting problems, Thrust Area Report FY89. Lawrence Livermore National Laboratory Report, pp. 4-8, (1990)

[4]

[5]

Lucca, Rohrer, Komanduri, Energy dissipation in the ultra-precision machining of copper, Ann CIRP, 40, pp. 69-72, (1991)

[6]

Donaldson, Syn, Taylor, Ikawa, Shimada, Minimum thickness of cut in diamond turning of electroplated copper, UCRL-97606, (1987)

[7]

Ikawa, Et al., Limitation in accuracy of ultraprecision metal cutting, Journal of the Japan Society for Precision Engineering, 52, pp. 2000-2004, (1986)

[8]

Ueda, Et al., Machining high precision mirrors using newly developed CNC machine, Ann CIRP, 41, (1991)

[9]

Furukawa, Et al., Development of ultra precision machine tool made of ceramics, Ann CIRP, 35, pp. 279-282, (1986)

[10]

Liang, Moronuki, Furukawa, Calculation of the effect of anisotropy of workpiece material on microcutting process, Prec Eng, 16, pp. 132-138, (1994)

← 1 2 →