KINEMATICS OF THE BALL SCREW MECHANISM

被引：78

作者：

LIN, MC

RAVANI, B

VELINSKY, SA

机构：

[1] Department of Mechanical and Aeronautical Engineering, University of California-Davis, Davis, CA

来源：

JOURNAL OF MECHANICAL DESIGN | 1994年 / 116卷 / 03期

关键词：

D O I：

10.1115/1.2919459

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This paper studies the kinematics of the Ball Screw Mechanism (BSM) with the aim of developing a foundation for understanding the motion of the balls and their contact patterns with the contacting elements. It is shown that there is always slip between the balls and the nut or screw, and therefore, the no-slip condition assumed in the BSM literature is not attainable. The effect of contact deformation on the motion of the balls is also studied and is used to develop the pattern of the constant sliding lines of contact between the ball and the screw or the nut. The results have applications in efficiency analysis, design, wear evaluation and finite element modeling of the BSM.

引用

页码：849 / 855

页数：7

共 9 条

[1]

Belyaev V.G., Drobashevskii G.S., Recirculating Ball Nut and Screw Transmissions with Arched and Semi-Circular Thread Profiles, Russian Engineering Journal, 9, pp. 18-21, (1974)

[2]

Belyaev V.G., Malyuga V.S., The Force Transfer Factor in the Return Channel of a Ball Screw Mechanism, Soviet Engineering Research, 3, 2, pp. 78-80, (1983)

[3]

Belyaev V.G., Turavinov V.P., Positioning Accuracy of Ball-Screw Mechanism, Soviet Engineering Research, 1, 5, (1981)

[4]

Drozdov Y.N., Calculating the Wear of a Screw and Nut Transmission with Sliding Friction, Soviet Engineering Research, 4, 5, pp. 6-8, (1984)

[5]

Harris T.A., Rolling Bearing Analysis, (1984)

[6]

Jones A.B., Ball Motion and Sliding Friction in Ball Bearings, Journal of Basic Engineering, Transactions of the ASME, 81, 1, pp. 1-12, (1959)

[7]

Levit G.A., Recirculating Ball Screw and Nut Units, Machines and Tooling, XXXIV, 4, pp. 3-8, (1963)

[8]

Lin M.C., Velinsky S.A., Ravani B., Design of Ball Screw Mechanism for Optimal Efficiency, ASME Journal of Mechanical Design, (1994)

[9]

Mukhortov V.N., Increasing the Life of Anti-Friction Screw-and-Nut Transmissions, Soviet Engineering Research, 2, 10, pp. 86-87, (1982)

← 1 →