FRICTION AND WEAR STUDIES OF POLYETHERIMIDE COMPOSITES

被引：26

作者：

BIJWE, J ^{[1
]}

TEWARI, US ^{[1
]}

VASUDEVAN, P ^{[1
]}

机构：

[1] INDIAN INST TECHNOL,CTR RURAL DEV & APPROPIATE TECHNOL,NEW DELHI 110016,INDIA

来源：

WEAR | 1990年 / 138卷 / 1-2期

关键词：

D O I：

10.1016/0043-1648(90)90168-A

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Polyetherimide (PEI) is a high performance thermoplastic polymide with good thermal, mechanical and electrical (insulating) properties with the added advantage of easy processability. Hence, for tribological studies, a short-glass-fibre-reinforced and internally solid lubricated composite of PEI was selected. Its friction and wear properties (in dry conditions) were tested for various experimental parameters such as load, sliding distance, speed and fibre orientation against a mild steel counterface. A very good combination of friction and wear properties was displayed by the composite. Its performance was compared with that of other PEI composites and bulk PEI for a better understanding of the role of fillers. Also, scanning electron microscopy studies were carried out on the worn pin and disc surfaces. © 1990.

引用

页码：61 / 76

页数：16

共 27 条

[1]

[Anonymous], COMPREHENSIVE GUIDE

[2] THE WEAR OF FILLED POLYTETRAFLUOROETHYLENE [J].

BAHADUR, S ;

TABOR, D .

WEAR, 1984, 98 (1-3) :1-13

[3]

BAHADUR S, 1985, POLYM WEAR ITS CONTR, V287, P252

[4] FRICTION AND WEAR STUDIES OF BULK POLYETHERIMIDE [J].

BIJWE, J ;

TEWARI, US ;

VASUDEVAN, P .

JOURNAL OF MATERIALS SCIENCE, 1990, 25 (1B) :548-556

[5]

BIJWE J, 1987, 1987 P INT TRIB C ME, P132

[6]

Bijwe J, 1990, J SYNTH LUB, V6, P179, DOI 10.1002/jsl.3000060302

[7]

BIJWE J, UNPUB TRIBOL INT

[8] THE FRICTION AND WEAR OF POLY(TETRAFLUOROETHYLENE)-POLY(ETHERETHERKETONE) COMPOSITES - AN INITIAL APPRAISAL OF THE OPTIMUM COMPOSITION [J].

BRISCOE, BJ ;

YAO, LH ;

STOLARSKI, TA .

WEAR, 1986, 108 (04) :357-374

[9]

Burlhis, 1983, J POLYM SCI POLYM S, V70, P129

[10]

Clauss FJ., 1972, SOLID LUBRICANTS SEL, V1

← 1 2 3 →