R-CURVE BEHAVIOR AND STRENGTH FOR INSITU REINFORCED SILICON NITRIDES WITH DIFFERENT MICROSTRUCTURES

R-curves for two in-situ reinforced silicon nitrides A and B of nominally the same composition are characterized using the Griffith equation and indentation fracture mechanics. These R-curves are calibrated against fine-grained silicon nitrides which have a known chevron-notch (long-crack) toughness and with a nearly flat R-curve behavior. Silicon nitride A, with its coarser microstructure and higher chevron-notch toughness, shows lower resistance to crack growth than silicon nitride B if the crack size is less than approximately 200-mu-m. These results are consistent with the indentation-strength measurements which show a crossover of strength between the two materials at an indentation load between 49 and 98 N, and below the crossover A has a lower strength. The toughening behavior is explained using an elastic-bridging model for the short crack, and a pullout model for the long crack. The effects of R-curve properties on design are discussed.