DIRECT ADAPTIVE-CONTROL OF PLUNGE GRINDING PROCESS USING ACOUSTIC-EMISSION (AE) SENSOR

被引：22

作者：

KONIG, W

ALTINTAS, Y

MEMIS, F

机构：

[1] Technical University of Aachen, Institute of Machine Tools and Production Engineering (WZL), Aachen

来源：

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 1995年 / 35卷 / 10期

关键词：

D O I：

10.1016/0890-6955(94)00124-3

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Modelling and adaptive control of plunge grinding operations using Acoustic Emission (AE) sensor are presented. The AE sensor is mounted on the grinding wheel spindle center, and the signals are transmitted to the receiver using a wireless transmission media. The root mean square (RMS) level of the AE signals are calibrated against major grinding parameters such as specific material removal rate, specific material removal, grinding wheel and workpiece diameters and wheel dressing conditions. The plunge grinding process is either planned a priori or adaptively controlled to achieve a desired surface finish quality using the experimentally calibrated empirical models. This adaptive control system is interfaced to a commercial CNC cylindrical grinding machine tool, and its effectiveness is demonstrated with grinding tests.

引用

页码：1445 / 1457

页数：13

共 18 条

[1]

Dornfeld, Cai, An investigation of grinding and wheel loading using acoustic emission, Trans. ASME, 106, pp. 28-33, (1984)

[2]

Inasaki, Okamura, Monitoring of dressing and grinding processes with acoustic emission signals, Ann. CIRP, 1, 25, pp. 277-280, (1977)

[3]

Koenig, Klumpen, Monitoring and sensor concepts for higher process reliability, SME Technical paper, MR93-358, (1993)

[4]

Koenig, Meyen, SME Technical paper, MR90-526, AE in dressing and grinding—accuracy and process reliability, (1990)

[5]

Meyen, Acoustic emission (AE)-Mikroseismik im Schleifprozess, doctoral thesis, (1991)

[6]

Malkin, Koren, Off-line grinding optimization with a microcomputer, Ann. CIRP, 29, 1, pp. 213-216, (1980)

[7]

Hahn, Graham, An application of force-adaptive grinding, SME Technical paper, MR84-530, (1984)

[8]

Webster, Zhao, Time optimum adaptive control of plunge grinding, Int. J. Machine Tool Manufact., 30, 3, pp. 412-413, (1990)

[9]

Toenshoff, Poop, Janocha, Selbst einstellendes AC-System fuer das Aussenrund-Einstechschleifen, wt - Werkstattstechnik, 81, pp. 31-35, (1991)

[10]

Blum, Dornfeld, Grinding process feedback using acoustic emission, SME Technical paper, MR90-525, (1990)

← 1 2 →