AN ANALYTICAL STUDY OF AUTOMOTIVE NEUTRAL GEAR RATTLE

被引：34

作者：

COMPARIN, RJ

SINGH, R

机构：

[1] Dept. Of Mech. Eng, University of Wisconsin, Madison, WI, 53706

[2] Dept. Of Mech. Eng, The Ohio State University, Columbus, OH, 43210

来源：

JOURNAL OF MECHANICAL DESIGN | 1990年 / 112卷 / 02期

关键词：

D O I：

10.1115/1.2912598

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

A reduced order nonlinear model of an automotive manual transmission is presented and the neutral rattle case is analyzed. For a single frequency excitation and primary resonance, approximate analytical solutions are developed for a multidegree- of-freedom model of a transmission using the method of harmonic balance. Based on these solutions, a simplified set of equations is developed for the study of neutral gear rattle and the use of these equations for design studies is illustrated. The nonlinear frequency response characteristics are discussed and the results are compared to similar studies described in the literature. It is shown that this analysis provides an improved understanding of the neutral gear rattle problem as well as an analytical basis for the nonlinear behavior reported in the literature. © 1990 by ASME.

引用

页码：237 / 245

页数：9

共 22 条

[1] Azar R.C., Crossley F.R.E., An Experimental Investigation of Impact Phenomenon in Spur Gear Systems, Proceedings of the 4Th World Congress on Theory of Machines and Mechanismsi, 1, pp. 157-161, (1975)
[2] Azar R.C., Crossley F.R.E., Digital Simulation of Impact Phenomena in Spur Gear System, ASME Journal of Engineering for Industry, 99, pp. 792-798, (1977)
[3] Comparin R.J., A Study of the Frequency Response of Impact Pairs with Application to Automotive Gear Rattle, (1988)
[4] Comparin R.J., Singh R., Nonlinear Frequency Response Characteristics of an Impact Pair, Journal of Sound and Vibration, 133, 1, (1989)
[5] Drexl H.J., Torsional Dampers and Alternative Systems to Reduce Driveline Vibrations, (1987)
[6] Fudala G.J., Engle T.C., Karvelis A.V., A Systems Approach to Reducing Gear Rattle, SAE Paper, (1987)
[7] Fujimoto T., Chikatani Y., Kojima J., Reduction of Idling Rattle in Manual Transmissions, SAE Paper, (1987)
[8] Hayashi T., Nishi N., Ohno T., Crossley F.R.E., Multiple Impacts of a Cylinder Between Two Planes and of the Meshing Teeth of a Pair of Gears, Proceedings of the 5Th World Congress on the Theory of Machines and Mechanisms, pp. 350-353, (1979)
[9] Hedges J.I., Butler K.J., A CAD System for the Analysis of Vehicle Driveline Noise, I Mech E, Paper, C121, 79, (1979)
[10] Gelb A., Ad Vander Velde W., Multiple-Input Describing Functions and Nonlinear System Design, (1968)

← 1 2 3 →