FRACTURE AND FLEXURAL CHARACTERIZATION OF SICW/SIC COMPOSITES AT ROOM AND ELEVATED-TEMPERATURES

被引:22
作者
MAHFUZ, H
ZADOO, DP
WILKS, F
MANIRUZZAMAN, MD
JEELANI, S
机构
[1] Materials Research Laboratory, Tuskegee University, Tuskegee, AL
关键词
D O I
10.1007/BF01184593
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The fracture and flexural behaviour of monolithic SiC and SiC-whisker reinforced SiC composites (SiCwSiC) has been investigated at room and elevated temperatures, Flexure and fracture tests were conducted in a four-point beam configuration at 23 degrees C, 800 degrees C and 1200 degrees C to study the effects of whisker reinforcements especially in respect of mechanical and thermal stability at high energy environments. Flexural strengths and fracture toughness data within the test temperature range are presented in graphical as well as in Weibull form, and experimental observations are analysed and discussed, Increase in flexural strength as well as in fracture toughness has been observed with the whisker reinforcement. However, it was found that the trend discontinues after a certain range of temperature. Post-failure analyses have been performed with the scanning electron microscope (SEM). Formation of glass phase has been observed at the whisker/matrix interface and the crack growth was found to be shifting from intergranular to transgranular with the rise in temperature. Effects of whisker reinforcement and the degradation of flexural and fracture properties at elevated temperature are investigated. Ultrasonic velocity measurements have been performed through the thickness of the untested as well as fractured specimen, and the variation in the sonic wave velocity is discussed in this paper.
引用
收藏
页码:2406 / 2411
页数:6
相关论文
共 9 条
[1]  
Shang J.K., Yu W., Ritchie R.O., Mater. Sci. Eng., 102, (1988)
[2]  
Green D.J., Proceedings of the International Symposium on Advances in Processing of Ceramics and Metal Matrix Composites, Halifax, August, (1989)
[3]  
Huq N., Haque A., Jeelani S., J. Mater. Sci., 27, (1992)
[4]  
Saleekin S., Haque A., Huq N., Copes J.S., Mahfuz H., Jeelani S., Effect of reinforcement geometry on the mechanical properties of composites, Composites Engineering, 2, (1992)
[5]  
Becher P.F., Hsueh C., Angelini P., Tiegs T.N., J. Am. Ceram. Soc., 71, (1988)
[6]  
Microstructure and Properties of Ceramic Matrix Composites, (1992)
[7]  
Munz D.J., Shannon J.L., Busbey R.T., Fracture toughness calculation from maximum load in four point bend tests of chevron notch specimens, International Journal of Fracture, 16 R, (1980)
[8]  
Lamicq P.J., Bernhart G.A., Dauchier M.M., Mace J.G., Amer. Ceram. Soc. Bull., 65, (1986)
[9]  
Han L.X., Warren R., Suresh S., Acta Metall. Mater., 40, (1992)