AN ABSOLUTE DIFFERENTIAL MAXIMUM BUBBLE PRESSURE SURFACE TENSIOMETER EMPLOYING DISPLACED CAPILLARIES

A modification of the differential maximum bubble pressure method for determining surface tensions is described. In this method, surface tension is calculated from the difference between maximum bubble pressures reached at capillaries of differing internal radii, vertically displaced by an amount calculated from the theory of Cuny and Wolf ((1956) Ann Physik 17:57). The density dependence of the technique is eliminated and surface tension becomes a truly linear function of the differential maximum bubble pressure, which is easily measured. The absolute measuring technique is illustrated for equilibrium and dynamic surface tensions of a series of pure liquids and aqueous solutions. For dynamic measurements on surfactant solutions, some important experimental considerations and limitations are described. In particular, a previously unrecognized source of error in estimating bubble surface ages is identified. It was found that the maximum bubble pressure for a large capillary does not immediately precede the detachment of the bubble, but occurs at one-third the overall bubble period. Thus, for large capillaries, subsequent to attaining the maximum bubble pressure, there exists a significant decay time in addition to the dead time. In general, surface ages corresponding to maximum pressure at small and large capillaries bubbling with the same period are not equal. This can lead to a large error in dynamic and equilibrium surface tensions of surfactant solutions. With suitable correction the technique is capable of measuring absolute surface tension, even for quite slowly equilibrating surfactant solutions.