IMPROVED METHOD FOR IN-SITU ELASTIC-CONSTANTS OF ISOTROPIC AND ORTHOTROPIC COMPOSITE-MATERIALS USING PLATE MODAL DATA WITH TRIMODAL AND HEXAMODAL RAYLEIGH FORMULATIONS

被引：14

作者：

AYORINDE, EO

GIBSON, RF

机构：

[1] Advanced Composites Research Laboratory, Department of Mechanical Engineering, Wayne State University, Detroit, MI

来源：

JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME | 1995年 / 117卷 / 02期

关键词：

D O I：

10.1115/1.2873882

中图分类号：

O42 [声学];

学科分类号：

070206 ; 082403 ;

摘要：

This paper relates a further development of an earlier work by the authors, in which they presented a method for deriving the four independent elastic constants (longitudinal and transverse Young's moduli, in-plane shear modulus and major Poisson's ratio) of an orthotropic material from resonance data obtained in a modal analysis of a freely-supported plate made out of the material In the present work, simple averaging, as opposed to the weighted averaging employed in the earlier version, is utilized. The use of three modes and six modes is compared on the basis of results of both the forward and the inverse problems. Results are obtained for materials spanning orthotropy ratios from unity (i.e., isotropic) to about 13. The results suggest that, in comparison with our earlier method, the improved method is easier to use and is just as accurate. The adaptability of the basic method developed by the authors to various levels and types of refinement is also demonstrated, as is the potential of the method for fast characterization of elastic properties of advanced composites.

引用

页码：180 / 186

页数：7

共 14 条

[1]

ASTM Standards and Literature References for Composite Materials, ASTM, (1987)

[2]

Test Procedures for Automotive Structural Composite Materials, A.C.C., (1990)

[3]

Ayorinde E.O., Gibson R.F., Optimized Six-mode Rayleigh Formulation for Determination of Elastic Constants of Orthotropic Composite Materials from Plate Vibration Resonance Data, Vibroacoustic Characterization of Materials & Structures, 14, pp. 167-175, (1992)

[4]

Ayorinde E.O., Determining Elastic Constants of Orthotropic Composite Plates Using an Optimized Rayleigh Formulation Including Through-the-thickness Shear and Rotary Inertia, Dynamic Characterization of Advanced Materials, 16, pp. 77-85, (1993)

[5]

Ayorinde E.O., Gibson R.F., Elastic Constants of Orthotropic Composite Materials Using Plate Resonance Frequencies, Classical Lamination Theory and an Optimized Three-mode Rayleigh Formulation, Composites Engineering, 3, 5, pp. 395-407, (1993)

[6]

Ayorinde E.O., Gibson R.F., Wen Y.F., Elastic Constants of Isotropic and Orthotropic Composite Materials from Plate Vibration Test Data, pp. 150-161, (1993)

[7]

Blevins R.D., Formulas for Natural Frequency and Mode Shape, pp. 261-264, (1979)

[8]

Deobald L.R., Gibson R.F., Determination of Elastic Constants of Orthotropic Plates by a Modal Analysis/Rayleigh-Ritz Technique, Journal of Sound and Vibration, 124, 2, pp. 269-283, (1988)

[9]

Jones R.M., Mechanics of Composite Materials, (1975)

[10]

Kim C.S., Dickinson S.M., Improved Approximate Expressions for the Natural Frequencies of Isotropic and Orthotropic Rectangular Plates, Journal of Sound and Vibration, 103, 1, pp. 142-149, (1985)

← 1 2 →