DYNAMIC DEFORMATION OF SHOCK PRESTRAINED COPPER

被引:59
作者
FOLLANSBEE, PS
GRAY, GT
机构
[1] Materials Science and Technology Division, Los Alamos National Laboratory, Los Alamos
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 1991年 / 138卷 / 01期
基金
美国能源部;
关键词
D O I
10.1016/0921-5093(91)90673-B
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Measurements of yield stress and strain hardening behavior at strain rates in the range 10(-3)-10(4) s-1 are reported for copper that has been previously shock deformed at a shock pressure of 10 GPa. Characterization of the mechanical properties and microstructure, using transmission electron microscopy, showed that the hardening induced by the shock wave is equivalent to that achieved when copper is deformed at low strain rates to strains between 20% and 30%. Deformation in the shock-deformed material is analyzed using the internal-state-variable model applied by Follansbee and Kocks. The model adequately describes the stress levels, the strain hardening rate, and the dependence of the flow stress on strain rate measured for high strain rate compression tests on the shock-deformed material.
引用
收藏
页码:23 / 31
页数:9
相关论文
共 32 条
[1]   SOME OBSERVATIONS OF DISCONTINUOUS YIELDING PHENOMENA IN COPPER NICKEL AND ALUMINIUM AFTER SHOCK LOADING [J].
APPLETON, AS ;
WADDINGTON, JS .
PHILOSOPHICAL MAGAZINE, 1965, 12 (116) :273-+
[2]  
ARMSTRONG PE, 1989, INST PHYS CONF SER, V102, P237
[3]   A NOTE ON DISLOCATION-CELL STRUCTURES IN COMMERCIAL COPPER [J].
CHANG, YJ ;
SHUME, AJ ;
BASSIM, MN .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1988, 103 (02) :L1-L4
[4]   EFFECT OF STRAIN RATE ON THE DISLOCATION SUBSTRUCTURE IN DEFORMED COPPER POLYCRYSTALS [J].
CHEVAL, F ;
PRIESTER, L .
SCRIPTA METALLURGICA, 1989, 23 (11) :1871-1876
[5]  
Follansbee P. S., 1986, Shock Waves in Condensed Matter, P371
[6]  
Follansbee P. S., 1988, Shock Waves in Condensed Matter 1987. Proceedings of the American Physical Society Topical Conference, P249
[7]  
Follansbee P S, 1986, METALLURGICAL APPL S, P451
[8]   WAVE-PROPAGATION IN THE SPLIT HOPKINSON PRESSURE BAR [J].
FOLLANSBEE, PS ;
FRANTZ, C .
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1983, 105 (01) :61-66
[9]   A CONSTITUTIVE DESCRIPTION OF THE DEFORMATION OF COPPER BASED ON THE USE OF THE MECHANICAL THRESHOLD STRESS AS AN INTERNAL STATE VARIABLE [J].
FOLLANSBEE, PS ;
KOCKS, UF .
ACTA METALLURGICA, 1988, 36 (01) :81-93
[10]  
FOLLANSBEE PS, IN PRESS J PLASTICIT