DETERMINATION OF OPTIMAL CUTTING CONDITIONS USING DESIGN OF EXPERIMENTS AND OPTIMIZATION TECHNIQUES

被引：80

作者：

CHUA, MS

RAHMAN, M

WONG, YS

LOH, HT

机构：

[1] Department of Mechanical and Production Engineering, National University of Singapore, Singapore, 0511

来源：

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 1993年 / 33卷 / 02期

关键词：

Carbides - Mathematical models - Numerical control systems - Optimization;

D O I：

10.1016/0890-6955(93)90081-5

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In process planning or NC part programming, optimal cutting conditions are to be determined using reliable mathematical models representing the machining conditions of a particular work-tool combination. The development of such mathematical models requires detailed planning and proper analysis of experiments. In this paper, the mathematical models for TiN-coated carbide tools and Rochling T4 medium carbon steel were developed based on the design and analysis of machining experiments. The models developed were then used in the formulation of objective and constraint functions for the optimization of a multipass turning operation with such work-tool combinations.

引用

页码：297 / 305

页数：9

共 9 条

[1]

Box, Draper, Empirical Model-Building and Response Surfaces, (1987)

[2]

Montgomery, Design and Analysis of Experiments, (1984)

[3]

Armarego, Brown, The Machining of Metals, pp. 254-291, (1969)

[4]

Chia, Optimization analysis and strategies for the selection of cutting conditions for turning operations, Ph.D. thesis, (1985)

[5]

Bazaraa, Shetty, Nonlinear Programming, (1979)

[6]

Luenberger, Introduction to Linear and Nonlinear Programming, (1984)

[7]

Yeo, Rahman, Wong, Towards enhancement of machinability data by multiple regression, J. Mech. Working Tech., 19, pp. 85-100, (1989)

[8]

SAS User's Guide: Statistics, (1985)

[9]

Chua, Loh, Wong, Rahman, Optimization of cutting conditions for multipass turning operations using sequential quadratic programming, Proc. 7th Int. Conf. on Computer-Aided Prod. Engng, pp. 305-314, (1991)

← 1 →